Shamil Posted October 22, 2016 Share Posted October 22, 2016 1 minute ago, Papusan said: Read SECTION 4 - ACCOUNT PROMOTIONS https://www.techinferno.com/index.php?/ti-tos/tos/ This does not start very well. That's not how we do it on the web. You ask me to share other people's hard work. This is wrong!! Sorry, bro. I'm very tired this days, because of my gpu issues, so its reason why I need it. I'm sorry man, really Quote Link to comment Share on other sites More sharing options...
thegh0sts Posted October 22, 2016 Share Posted October 22, 2016 4 hours ago, Shamil said: Sorry, bro. I'm very tired this days, because of my gpu issues, so its reason why I need it. I'm sorry man, really you either pay up or make 5 posts. Besides, the 375.57 drivers are borked so wait a bit longer for a hotfix. Quote Link to comment Share on other sites More sharing options...
Glamdril Posted October 23, 2016 Share Posted October 23, 2016 Hi all. New here to T|I after realizing BF1 wouldn't run without updated drivers. I had hoped I wouldn't have to do this since I had a friend fix up my AW M17xR4 with a GTX 880M; he told me under no circumstances should I do anything without his help... but since he's passed on now that leaves me with little choice. I never really wanted to worry about it until now, but I guess I was only stalling the inevitable. Ever since then I've been running the 345.20 drivers. What worries me most is that I'll end up bricking my display, and while I'm not running W10 nor do I have PrecisionX installed, the last thing I need is for my system to cost me more than it already has. I've already had the mobo burnt once and the display bricked as well. Agh, I regret having ever bought this laptop. Specs Model: Alienware M17xR4 OS: Win7 Pro x64 CPU: i7-3740QM @ 2.70 GHz GPU: GeForce GTX 880M RAM: 16GB 1600MHz DDR3 Storage: 256GB SSD While I'm ashamed to admit that I'm probably less tech-savvy than my baby boomer gramps, it would be an exercise in futility to pretend otherwise. On that note, I should say that I have no idea how to follow the instructions given by J95 for the 372.95 drivers. To me it just seems very cryptic, so I hope you can forgive me. I'm probably asking for special treatment here, but I'll do anything I need to to help-you-help-me. Quote Link to comment Share on other sites More sharing options...
Guest Posted October 23, 2016 Share Posted October 23, 2016 On 10/21/2016 at 6:24 PM, thegh0sts said: Thanks@j95 though it seems there's heap of issues with this driver. Sent from my SM-N910G using Tapatalk It's working fine with my 980M in El Cazador. What kind of issues are you experiencing with it. @J95 - thanks, nephew Quote Link to comment Share on other sites More sharing options...
Shamil Posted October 23, 2016 Share Posted October 23, 2016 On 22.10.2016 at 2:40 PM, thegh0sts said: you either pay up or make 5 posts. Besides, the 375.57 drivers are borked so wait a bit longer for a hotfix. thanx dude Quote Link to comment Share on other sites More sharing options...
loafer987 Posted October 23, 2016 Share Posted October 23, 2016 On 10/21/2016 at 6:24 PM, thegh0sts said: Thanks@j95 though it seems there's heap of issues with this driver. Sent from my SM-N910G using Tapatalk not sure what u mean ghosts. These are the best drivers I've come across for my aw17 yet. I havent tried BF1 yet but nothing but good news to report here so far. Im also running this driver on my m15x w 965m and its running below 70*C all day long. I'm very very happy with my m15x now! Quote Link to comment Share on other sites More sharing options...
szumial Posted October 23, 2016 Share Posted October 23, 2016 Hi @Glamdril! Even I managed to follow up when reading these posts so you too will get on with it Just try replacing the INF in Display Driver folder and delete what J95 shown on one of the pictures above. I can try to help you with that if you still can't do it. Just a quick question to you - how strong is your PSU for that Alienware? 3 Quote Link to comment Share on other sites More sharing options...
J95 Posted October 23, 2016 Author Share Posted October 23, 2016 GeForce 375.63 *Install drivers at your own risk* Windows 10 + GeForce Drivers are Killing Samsung and LG Notebook LCD Display Panels Uninstall both PrecisionX & MSI Afterburner (Keep RTSS) including screen overclocking tools *Still at risk* Requirements: Flash latest @Prema's v2 980M & 970M (Please consider donating to Prema) Win10/8.1 'F8' Boot options 'Safe Mode' & 'Disable driver Signing' cmd (Admin) bcdedit /set {default} bootmenupolicy legacy -> reboot -> F8 -> select 'Disable Driver Signature Enforcement' -> Install drivers Run DDU "Clean & Shutdown (Safe Mode) Extract driver using 7-Zip Display.Driver folder, copy/overwrite the proper .inf file(s). Extracted driver package >> delete the following folders as shown below (don't skip this step) -> run setup.exe >>> Keep these folders only <<< INF MOD v375.63 nv_dispi.inf (including nvdmi.inf) PEG/Dedicated All Models: M15x, M17x, AW17 R1, M18x, AW18 R1 (including Optimus/M17xR4) excluding AW 2015 - GTX 980 , 980M , 970M , 965M , 880M , 870M , 860M , 780M , 770M , 765M , 680M , 675MX , 670MX , 660M nvcvi.inf: Optimus Alienware 17 / 05AA (only) GTX 980M - 970M - 965M GeForce 375.63 Win 7/8.1 GeForce 375.63 Win10 Alienware Laptops nv_dispi.inf_v375.63_Win7_8.1_PEG_Dedicated_Alienware.zip nvcvi.inf_v375.63_Win7_8.1_Optimus_Alienware_17.zip nv_dispi.inf_v375.63_Win10_PEG_Dedicated_Alienware.zip nvcvi.inf_v375.63_Win10_Optimus_Alienware_17.zip Clevo Laptops (non-Optimus) nv_dispi.inf_v375.63_Win7_8.1_PEG_Dedicated_CLEVO.zip nv_dispi.inf_v375.63_Win10_PEG_Dedicated_CLEVO.zip AW 900M Throttling workarounds: M18xR2 Flash @Swick1981 [Bios Mod] M18xR2 - Legacy Support now Available M18xR2 980M workaround Hibernation method HERE and HERE @ All please use the SEARCH function to see if your question has been answered/posted already. https://www.techinferno.com/index.php?/announcement/4-user-account-promotion-rules-read-before-posting/ On 7/9/2016 at 3:03 AM, J95 said: @_ALL if you are enjoying @Prema's work, please consider making a contribution HERE. Much appreciated! @Glamdril Uninstall current drivers using DDU "Clean & Shutdown (Safe Mode) Download GeForce 375.63 Win 7/8.1 Extract driver package using 7-Zip. Right click, extract to "375.63-desktop-win8-win7-64bit-international-whql" Extracted driver package -> Display.Driver folder -> copy/overwrite nv_dispi.inf (unzip) -> run setup.exe -> select custom install option -> clean. "Installation successful" -> reboot. >>>Keep these folders only<<< @szumial You will need to flash an unlocked sBIOS and then disable iGPU (MUX), HD4000 probably won't get any update for RS1. 4 Quote Link to comment Share on other sites More sharing options...
dragonlord216 Posted October 23, 2016 Share Posted October 23, 2016 Hi guys, I'm totally new to this (I know zilch about modding). I recently got a GeForce 970M for my alienware m17x R4. After the auto updates, everything is working except PhysX. So I guess I'll need to add a custom driver. Can someone please explain all the steps to me? If there's already a post explaining everything for a noob, can someone please direct me to that post? I'm really sorry guys, but I can't exactly understand @J95's steps. I know I'm such a noob Thanks! Quote Link to comment Share on other sites More sharing options...
bloodhawk Posted October 24, 2016 Share Posted October 24, 2016 (edited) I managed to get the new drivers working on my system (GTX 1080 eGPU), might or might not work for you guys : Went into the BIOS and disabled - Advanced Error reporting for the PCIe slot i had my GTX 1080 connected to. Spoiler Also not sure if this is possible with every BIOS or not. Since i dont quite have the standard issue Prema BIOS. Edited October 24, 2016 by bloodhawk Quote Link to comment Share on other sites More sharing options...
thegh0sts Posted October 24, 2016 Share Posted October 24, 2016 10 hours ago, J95 said: GeForce 375.63 *Install drivers at your own risk* Windows 10 + GeForce Drivers are Killing Samsung and LG Notebook LCD Display Panels Uninstall both PrecisionX & MSI Afterburner (Keep RTSS) including screen overclocking tools *Still at risk* Requirements: Flash latest @Prema's v2 980M & 970M (Please consider donating to Prema) Win10/8.1 'F8' Boot options 'Safe Mode' & 'Disable driver Signing' cmd (Admin) bcdedit /set {default} bootmenupolicy legacy -> reboot -> F8 -> select 'Disable Driver Signature Enforcement' -> Install drivers Run DDU "Clean & Shutdown (Safe Mode) Extract driver using 7-Zip Display.Driver folder, copy/overwrite the proper .inf file(s). Extracted driver package >> delete the following folders as shown below (don't skip this step) -> run setup.exe >>> Keep these folders only <<< INF MOD v375.63 nv_dispi.inf (including nvdmi.inf) PEG/Dedicated All Models: M15x, M17x, AW17 R1, M18x, AW18 R1 (including Optimus/M17xR4) excluding AW 2015 - GTX 980 , 980M , 970M , 965M , 880M , 870M , 860M , 780M , 770M , 765M , 680M , 675MX , 670MX , 660M nvcvi.inf: Optimus Alienware 17 / 05AA (only) GTX 980M - 970M - 965M GeForce 375.63 Win 7/8.1 GeForce 375.63 Win10 Alienware Laptops nv_dispi.inf_v375.63_Win7_8.1_PEG_Dedicated_Alienware.zip nvcvi.inf_v375.63_Win7_8.1_Optimus_Alienware_17.zip nv_dispi.inf_v375.63_Win10_PEG_Dedicated_Alienware.zip nvcvi.inf_v375.63_Win10_Optimus_Alienware_17.zip Clevo Laptops (non-Optimus) nv_dispi.inf_v375.63_Win7_8.1_PEG_Dedicated_CLEVO.zip nv_dispi.inf_v375.63_Win10_PEG_Dedicated_CLEVO.zip AW 900M Throttling workarounds: M18xR2 Flash @Swick1981 [Bios Mod] M18xR2 - Legacy Support now Available M18xR2 980M workaround Hibernation method HERE and HERE @ All please use the SEARCH function to see if your question has been answered/posted already. https://www.techinferno.com/index.php?/announcement/4-user-account-promotion-rules-read-before-posting/ @Glamdril Uninstall current drivers using DDU "Clean & Shutdown (Safe Mode) Download GeForce 375.63 Win 7/8.1 Extract driver package using 7-Zip. Right click, extract to "375.63-desktop-win8-win7-64bit-international-whql" Extracted driver package -> Display.Driver folder -> copy/overwrite nv_dispi.inf (unzip) -> run setup.exe -> select custom install option -> clean. "Installation successful" -> reboot. >>>Keep these folders only<<< @szumial You will need to flash an unlocked sBIOS and then disable iGPU (MUX), HD4000 probably won't get any update for RS1. will give these a try. Quote Link to comment Share on other sites More sharing options...
Glamdril Posted October 24, 2016 Share Posted October 24, 2016 14 hours ago, szumial said: Hi @Glamdril! Even I managed to follow up when reading these posts so you too will get on with it Just try replacing the INF in Display Driver folder and delete what J95 shown on one of the pictures above. I can try to help you with that if you still can't do it. Just a quick question to you - how strong is your PSU for that Alienware? Hey there! Cheers for that mate; I'm having a crack at it tonight and will post back to say everything's good and well hopefully. The power supply I have is 240W btw. Also cheers @J95 for the help. I'll have a proper crack now that it's a little clearer! Quote Link to comment Share on other sites More sharing options...
.:VES:.Bounty Posted October 25, 2016 Share Posted October 25, 2016 hi. im new. try to download ifile but 2C171/1 error. pls help me. Thank You Quote Link to comment Share on other sites More sharing options...
szumial Posted October 26, 2016 Share Posted October 26, 2016 (edited) @J95 to be honest, your way of deleting files from the Nvidia folder works for me, yet in order to make Optimus work on M6700 I have to modify the INF files in yet another manner. When I used the ones you've listed here for me to download, all I could get was the GTX880m working via external output, such as HDMI / displayport and what I wanted was to make gaming possible here on both ext out and the LCD screen. Therefore I figured it out another way round: 1. I downloaded the Nvidia 372.90 driver pack and deleted folders as you proposed, yet left DisplayUpdate and Optimus 2. Modified nvdispi.inf adding GTX880m lines to the strings and somewhere above (but I'm not sure if it means anything) Now here comes the tricky part - don't ask me why I did that - it was an experiment. 3. Modified the Dell specific INF which is nvdmi.inf. Here's the trick - I've searched for GTX880m HWID which is "1198" and found out it was connected to Alienware HWIDs, such as 05AA, 05AB, etc. I grabbed the first one in the file, being the '05AA', and replaced it under "ntamd..." and in the strings sections so that it had M6700 ID --> 1198.153F. At first I did that only for one of these lines, so I left other "05AA" in their place. The GPU did not install as I wanted. Being extremely tired of trying my luck I came up with this idea to change EVERY "05AA" in the INF to mine "153F" and guess what? It worked! Actually, it still does. The issues I've got are: the first time I managed to install the driver it was stable only for some time and then after say a week or so, it started crashing games every 10-15 minutes. Hovewer the temperatures were never above 73 degrees and the framerates were very satisfying. Unfortunately the driver started crashing, sometimes leaving me with BSOD and a "DRIVER IRQL NOT LESS OR EQUAL" message - that's why I tried different drivers - with no luck. So I came back to 372.90 and right now the laptop runs on it pretty good, however, this time the FPS are worse and I still get a weird crash from time to time, for instance when launching youtube at fullscreen via HDMI on the GTX880m. Funny thing - the only way it works is when I replace Alienware "05AA" with "153F". I've tried that with different HWIDs, such as "05AB" and it didn't work as desired. Since this is an experiment I am not fully aware of what I did - in fact I started modding INFs like a month ago so I'm quite new to the topic. I don't know exactly what I did, but I believe I managed to trick the driver to install as if I had an Alienware/880m machine. Can anyone relate to that? @J95 what do you mean by sBIOS? From what I know, there is no unlocked version for M6700. And what is "RS1"? @Glamdril, how did it go? Were you able to install the drivers properly mate? edit I should probably also mention that the M6700's BIOS doesn't list GTX880m under the GPU section - I can only see it in Windows. Edited October 26, 2016 by szumial Quote Link to comment Share on other sites More sharing options...
mariussx Posted October 26, 2016 Share Posted October 26, 2016 (edited) Thanks, J95. These drivers seem fine to me. Maximum temp during the test was 71C (with 22 ambient). http://www.3dmark.com/3dm/15661011? http://www.3dmark.com/3dm/15661094? I did not do any benches for a while, so I am not sure if this is 3D mark update or driver update: these drivers no longer crash on 3D mark if there is not enough voltage. The test simply gets cancelled, while with the older 3D mark and older drivers the driver would crash. So this is great news. @szumial, RS1 stands for Readstone 1, which is a codename for Windows 10 Anniversary Update. Edited October 26, 2016 by mariussx 2 Quote Link to comment Share on other sites More sharing options...
szumial Posted October 26, 2016 Share Posted October 26, 2016 Thanks @mariussx! From your signature I can see that you are running an AW laptop with a 330 Watt PSU - I have a 240 Watt one and similar config (i7-3940XM and GTX880m). Can you tell me if there is a way of checking if my PSU is enough for the PC? Quote Link to comment Share on other sites More sharing options...
mariussx Posted October 26, 2016 Share Posted October 26, 2016 29 minutes ago, szumial said: Thanks @mariussx! From your signature I can see that you are running an AW laptop with a 330 Watt PSU - I have a 240 Watt one and similar config (i7-3940XM and GTX880m). Can you tell me if there is a way of checking if my PSU is enough for the PC? Not the most accurate, but there is a way to enable live wattage display using HWinfo64 and RTSS: http://forum.notebookreview.com/threads/how-to-monitoring-cpu-and-gpu-temperatures-in-game-in-benchmark-with-on-screen-display.655138/ Please do not use MSI afterburner or EVGA Precision X as they kill the screens. Mr. Fox created a great guide on how to setup HWinfo and RTSS for OSD, checked the last edit for a link. There is also hardware like kill a watt, which measures the power draw of the appliance connected. Quote Link to comment Share on other sites More sharing options...
szumial Posted October 26, 2016 Share Posted October 26, 2016 (edited) I'll go for the software means first and only resort to hardware (which would obviously be better) if doubts come Thanks! edit Just had a chance to play a bit of Witcher 3 and got the same problem again - game is crashing within 10-15 of gameplay. Temperature sensor from GPU-Z read 84 degrees top. Is the temperature the reason for crashes then? Edited October 26, 2016 by szumial Quote Link to comment Share on other sites More sharing options...
joluke@inphtech Posted October 28, 2016 Share Posted October 28, 2016 (edited) @J95 nvidia driver 375.70 is out:http://www.geforce.com/drivers/results/110603 Edited October 28, 2016 by joluke@inphtech Quote Link to comment Share on other sites More sharing options...
J95 Posted October 28, 2016 Author Share Posted October 28, 2016 GeForce 375.70 *Install drivers at your own risk* Windows 10 + GeForce Drivers are Killing Samsung and LG Notebook LCD Display Panels Uninstall PrecisionX, including screen overclocking tools. Instead, keep MSI Afterburner's RTSS for monitoring purposes. Requirements: Flash latest @Prema's v2 980M & 970M (Please consider donating to Prema) Win10/8.1 'F8' Boot options 'Safe Mode' & 'Disable driver Signing' cmd (Admin) bcdedit /set {default} bootmenupolicy legacy -> reboot -> F8 -> select 'Disable Driver Signature Enforcement' -> Install drivers Run DDU "Clean & Shutdown (Safe Mode) Extract driver using 7-Zip Display.Driver folder, copy/overwrite the proper .inf file(s). Extracted driver package >> delete the following folders as shown below (don't skip this step) -> run setup.exe >>> Keep these folders only <<< INF MOD v375.70 nv_dispi.inf (including nvdmi.inf) PEG/Dedicated All Models: M15x, M17x, AW17 R1, M18x, AW18 R1 (including Optimus/M17xR4) excluding AW 2015 - GTX 980 , 980M , 970M , 965M , 880M , 870M , 860M , 780M , 770M , 765M , 680M , 675MX , 670MX , 660M nvcvi.inf: Optimus Alienware 17 / 05AA (only) GTX 980M - 970M - 965M GeForce 375.70 Win 7/8.1 GeForce 375.70 Win10 Alienware Laptops nv_dispi.inf_v375.70_Win7_8.1_PEG_Dedicated_Alienware.zip nvcvi.inf_v375.70_Win7_8.1_Optimus_Alienware_17.zip nv_dispi.inf_v375.70_Win10_PEG_Dedicated_Alienware.zip nvcvi.inf_v375.70_Win10_Optimus_Alienware_17.zip Clevo Laptops (non-Optimus) nv_dispi.inf_v375.70_Win7_8.1_PEG_Dedicated_CLEVO.zip nv_dispi.inf_v375.70_Win10_PEG_Dedicated_CLEVO.zip AW 900M Throttling workarounds: M18xR2 Flash @Swick1981 [Bios Mod] M18xR2 - Legacy Support now Available M18xR2 980M workaround Hibernation method HERE and HERE @ All please use the SEARCH function to see if your question has been answered/posted already. https://www.techinferno.com/index.php?/announcement/4-user-account-promotion-rules-read-before-posting/ On 7/9/2016 at 3:03 AM, J95 said: @_ALL if you are enjoying @Prema's work, please consider making a contribution HERE. Much appreciated! 4 Quote Link to comment Share on other sites More sharing options...
thegh0sts Posted October 29, 2016 Share Posted October 29, 2016 Thanks. I'll download them when I get home. Sent from my SM-N910G using Tapatalk Quote Link to comment Share on other sites More sharing options...
Rohr7 Posted October 29, 2016 Share Posted October 29, 2016 Hello, Sorry, if I'm asking in the wrong area... I would like some input from those who used other drivers prior to using the ones provided here and their results. I am looking for a possible solution to some low-ish performance. I have an Alienware 17, r5, 4700mq that I just upgraded to a 980m. Windows 10. I have a 240w adapter. I was able to get the eurocom drivers to install, and ran some firestrike runs to check performance/stability. Temps haven't broke 65c for the 980m and the cpu sits in the 60s as well, but my highest run on dedicated is roughly 8700 for graphics score.. I feel like this is low. Prior to that, when I had optimus enabled, I had hit right around 9100. This is with the stock bios as well (or whatever woodzstack has on his cards) Basically just curious if anyone thinks this would be driver related, or something else. I have tried older drivers, but with the same results. If driver related - would the drivers provided here help me? Or would they only help if I have a different vbios - Prema or Svl7? Thank you!! Quote Link to comment Share on other sites More sharing options...
kkthebeast Posted November 2, 2016 Share Posted November 2, 2016 hmm, Is anyone else having trouble downloading files? I keep getting the error message: Error code: 2C171/1 The page you are trying to access is not available for your account. Quote Link to comment Share on other sites More sharing options...
Curtis_AW17R5 Posted November 2, 2016 Share Posted November 2, 2016 @Rohr7 the same here. I cant even switch it to dedicated mode . when I switch it via osd ( uefi checked, gpt checked, disable fast reboot and secure boot) , after reboot it turned in black screen with no beep no back-light. I can only get 8900 score in fire strike with optimus mode. I'm wondering if I can install the driver without osd and I'm a nood dont really understand the procedure like -> reboot -> F8 -> select 'Disable Driver Signature Enforcement' -> Install drivers and then run ddu clean it? please forgive me and help.. Quote Link to comment Share on other sites More sharing options...
.:VES:.Bounty Posted November 3, 2016 Share Posted November 3, 2016 On 2016. 09. 22. at 2:43 PM, J95 said: GeForce 372.90 *Install drivers at your own risk* Windows 10 + GeForce Drivers are Killing Samsung and LG Notebook LCD Display Panels Uninstall both PrecisionX & MSI Afterburner (Keep RTSS) including screen overclocking tools *Still at risk* Requirements: Flash latest @Prema's v2 980M & 970M (Please consider donating to Prema) Win10/8.1 'F8' Boot options 'Safe Mode' & 'Disable driver Signing' cmd (Admin) bcdedit /set {default} bootmenupolicy legacy -> reboot -> F8 -> select 'Disable Driver Signature Enforcement' -> Install drivers Run DDU "Clean & Shutdown (Safe Mode) Extract driver using 7-Zip Display.Driver folder, copy/overwrite the proper .inf file(s). Extracted driver package >> delete the following folders as shown below (don't skip this step) -> run setup.exe >>> Keep these folders only <<< INF MOD v372.90 nv_dispi.inf (including nvdmi.inf) PEG/Dedicated All Models: M15x, M17x, AW17 R1, M18x, AW18 R1 (including Optimus/M17xR4) excluding AW 2015 - GTX 980 , 980M , 970M , 965M , 880M , 870M , 860M , 780M , 770M , 765M , 680M , 675MX , 670MX , 660M nvcvi.inf: Optimus Alienware 17 / 05AA (only) GTX 980M - 970M - 965M GeForce 372.90 Win 7/8.1 GeForce 372.90 Win10 Alienware Laptops nv_dispi.inf_v372.90_Win7_8.1_PEG_Dedicated_Alienware.zip nvcvi.inf_v372.90_Win7_8.1_Optimus_Alienware_17.zip nv_dispi.inf_v372.90_Win10_PEG_Dedicated_Alienware.zip nvcvi.inf_v372.90_Win10_Optimus_Alienware_17.zip Clevo Laptops (non-Optimus) nv_dispi.inf_v372.90_Win7_8.1_PEG_Dedicated_CLEVO.zip nv_dispi.inf_v372.90_Win10_PEG_Dedicated_CLEVO.zip nv_dispi.inf_v372.90_Win7_8.1_PEG_Dedicated_CLEVO_GTX_10xx.zip nv_dispi.inf_v372.90_Win10_PEG_Dedicated_CLEVO_GTX_10xx.zip AW 900M Throttling workarounds: M18xR2 Flash @Swick1981 [Bios Mod] M18xR2 - Legacy Support now Available M18xR2 980M workaround Hibernation method HERE and HERE @ All please use the SEARCH function to see if your question has been answered/posted already. @AdamU please follow the instructions above https://www.techinferno.com/index.php?/announcement/4-user-account-promotion-rules-read-before-posting/ Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.