BigBr0ski Posted June 25, 2016 Share Posted June 25, 2016 4 hours ago, Mr. Fox said: I see you found it. I sent you a message with more detail. The INF is already modded for you. It's more of a mod than just your hardware ID. @J95 did some magic stuff to help stop the nonsense Alienware has developed a reputation for, and fixed some of NVIDIA's cancer crap. Sister @BigBr0ski was having troubles very similar to yours and this driver mod cured all of her woes, or so it seems. You might want to look into using this new unlocked BIOS. The stock locked BIOS is trash. I had it on my M18xR2 before I sold it to the guy that developed the new mod and a lot of people are very pleased with it. I was wondering why you kept calling me sister, then I realized my profile was set to female, awkward lol. but yes, this bad boy worked perfectly Quote Link to comment Share on other sites More sharing options...
momulah Posted June 25, 2016 Share Posted June 25, 2016 (edited) I removed my previous invidia drivers in safe mode using ddu. I was running peg with no Intel driver installed at all. After reboot windows comes to black screen and the restore point didn't save with previous working drivers. I am trying to see what's possible as I somehow need to install the drivers in safe mode but without signature verification and I'm not sure if that's possible. I'm guessing maybe installing Inteldriver in safe mode may let me boot to start over again though I wanted to avoid that. Windows is also set to never update video drivers in Windows 10 as per DDU. Any ideas other than what I stated above? Edited June 25, 2016 by momulah Quote Link to comment Share on other sites More sharing options...
Guest Posted June 25, 2016 Share Posted June 25, 2016 1 hour ago, BigBr0ski said: I was wondering why you kept calling me sister, then I realized my profile was set to female, awkward lol. but yes, this bad boy worked perfectly LOL, yes. I looked at your profile and changed it from brother to sister, ha ha!! I thought your forum name was odd for a girl, but I have seen stranger things along those lines. I figured don't ask/don't tell would be the best approach. Sorry for the mix up. Quote Link to comment Share on other sites More sharing options...
Guest Posted June 25, 2016 Share Posted June 25, 2016 58 minutes ago, momulah said: I removed my previous invidia drivers in safe mode using ddu. I was running peg with no Intel driver installed at all. After reboot windows comes to black screen and the restore point didn't save with previous working drivers. I am trying to see what's possible as I somehow need to install the drivers in safe mode but without signature verification and I'm not sure if that's possible. I'm guessing maybe installing Inteldriver in safe mode may let me boot to start over again though I wanted to avoid that. Windows is also set to never update video drivers in Windows 10 as per DDU. Any ideas other than what I stated above? You don't have a black screen in safe mode, correct? You could try running DDU in Safe Mode again. Or, install the NVIDIA driver in safe mode. Use the Legacy Advanced Boot menu and start the system in low resolution mode might work, too. If you haven't set Windows 8.1/10 to use the Legacy Advanced Boot menu you're doing it the harder / stupid Micro$haft way. Run the command below from an elevated (admin) command prompt and that will enable it so you can press F8 prior to Windows logon to see all the options like Windows 7. bcdedit /set {default} bootmenupolicy legacy Quote Link to comment Share on other sites More sharing options...
momulah Posted June 29, 2016 Share Posted June 29, 2016 I ended up just refreshing PC which cleared up a few other issues so it was much needed. The problem I was having was I couldn't install nvidia drivers in safe mode due to not being able to disable driver protection prior to. Its cleared up. Quote Link to comment Share on other sites More sharing options...
HaloTechnology Posted June 29, 2016 Share Posted June 29, 2016 Anyone else having problem with "Stub received bad data" , its probably for the latest Forceware driver , just as FYI Quote Link to comment Share on other sites More sharing options...
MondoJuan Posted June 30, 2016 Share Posted June 30, 2016 (edited) I have a GTX770M on Alienware M17xR2; I was installing 344 modded driver and new doom not run, Can I use this mod to run Doom??? Thanks Edited June 30, 2016 by MondoJuan Quote Link to comment Share on other sites More sharing options...
momulah Posted July 1, 2016 Share Posted July 1, 2016 (edited) 350.12 is in my opinion the best drivers even though a few post above seems otherwise. The 350.12 with V2 Prema mod is the only ones that dont drop severe frames during bench marking. I suggest if you are going to upgrade drivers use the 350.12 and flash V2 of Premas mod which works great on my M17xR4. The 368.25 keeps dropping frames during benchmarking which I attest to throttling even though I also flashed Premas V2 mod. I guess it depends on your rig. I am running on 980m so the card probably likes certain drivers best. I would start with my suggestion and the suggestion above with the 368.25 also to find the best which is probably the best start you're going to get. Oh and Doom on PC is terribly optimized with alot of crashed being reported including me with the steam version. Runs superd at Ultra then for no reasons just goes to desktop and crashes at random with no explanation. Reports are being made so hopefully they update it and we dont end up with another Batman Arkham conundrum. Hope this helps. Edited July 1, 2016 by momulah Quote Link to comment Share on other sites More sharing options...
ShatteredX Posted July 2, 2016 Share Posted July 2, 2016 @J95 Just installed 368.25 and ran Firestrike. I got the highest score ever for my M17xR4 http://www.3dmark.com/3dm/12889451 This is with a +225 Core / +400 Memory OC. I did have to use the Hibernate trick in order to prevent throttling. I'm also using 330w PSU as I suspect my 240w may be causing throttling too but I'm not sure. 2 Quote Link to comment Share on other sites More sharing options...
wuruochong Posted July 4, 2016 Share Posted July 4, 2016 (edited) @J95 Hey. I just followed your instructions for installing 368.25 on my M18xR2 with a single 980M (fantastic work on the guides btw!). Following your instructions I flashed Prema's vbios. My question is: is it absolutely necessary to use Prema's vbios for the new video drivers? As you know Prema's vbios has the card sit at a default voltage of 1.062, this is a bit of a problem for me since I only have a 240W power supply, and the current summer season + an unreliable AC puts my card at uncomfortably high temperatures with this voltage. Edited July 4, 2016 by wuruochong Quote Link to comment Share on other sites More sharing options...
twin snakes Posted July 4, 2016 Share Posted July 4, 2016 (edited) On 7/2/2016 at 5:59 PM, ShatteredX said: @J95 Just installed 368.25 and ran Firestrike. I got the highest score ever for my M17xR4 http://www.3dmark.com/3dm/12889451 This is with a +225 Core / +400 Memory OC. I did have to use the Hibernate trick in order to prevent throttling. I'm also using 330w PSU as I suspect my 240w may be causing throttling too but I'm not sure. OMG the Hibernate trick did work! Never know about this, you save my life! got over 19k graphic score with newer driver! never been so happy! Edited July 4, 2016 by twin snakes 1 Quote Link to comment Share on other sites More sharing options...
djcgeez2189 Posted July 7, 2016 Share Posted July 7, 2016 What is this "hibernate" trick?? i read there is throttling when you restart your pc or shut down. i always put my r2 in sleep mode i hardly ever shut if off. is there any benefit from the new 368.39 driver that was released yesterday? i dont see any mods yet for that either. Quote Link to comment Share on other sites More sharing options...
J95 Posted July 7, 2016 Author Share Posted July 7, 2016 GeForce 368.69 *Install drivers at your own risk* Windows 10 + GeForce Drivers are Killing Samsung and LG Notebook LCD Display Panels Uninstall both PrecisionX & MSI Afterburner (Keep RTSS) including screen overclocking tools *Still at risk* Requirements: Flash latest @Prema's v2 980M & 970M (Please consider donating to Prema) Win10/8.1 'F8' Boot options 'Safe Mode' & 'Disable driver Signing' cmd (Admin) bcdedit /set {default} bootmenupolicy legacy -> reboot -> F8 -> select 'Disable Driver Signature Enforcement' -> Install drivers Run DDU "Clean & Shutdown (Safe Mode) Extract driver using 7-Zip Display.Driver folder, copy/overwrite the proper .inf file Extracted driver package >> delete the following folders as shown below (don't skip this step) -> run setup.exe >>> Keep these folders only <<< INF MOD v368.69 nv_dispi.inf (including nvdmi.inf) PEG/Dedicated All Models: M15x, M17x, AW17 R1, M18x, AW18 R1 (including Optimus/M17xR4) excluding AW 2015 - GTX 980 , 980M , 970M , 965M , 880M , 870M , 860M , 780M , 770M , 765M , 680M , 675MX , 670MX , 660M nvcvi.inf: Optimus Alienware 17 / 05AA (only) GTX 980M - 970M - 965M GeForce 368.69 Win 7/8.1 GeForce 368.69 Win10 Alienware nv_dispi.inf_v368.69_Win7_8.1_PEG_Dedicated.zip nvcvi.inf_v368.69_Win7_8.1_Optimus_Alienware_17.zip nv_dispi.inf_v368.69_Win10_PEG_Dedicated.zip nvcvi.inf_v368.69_Win10_Optimus_Alienware_17.zip Clevo (non-Optimus) nv_dispi.inf_v368.69_Win7_8.1_PEG_Dedicated_CLEVO.zip nv_dispi.inf_v368.69_Win10_PEG_Dedicated_CLEVO.zip 900M Throttling workarounds: M18xR2 Flash @Swick1981 [Bios Mod] M18xR2 - Legacy Support now Available M18xR2 980M workaround @djcgeez2189 Hibernation method HERE and HERE @MondoJuan please install using nv_dispi.inf above. 2 Quote Link to comment Share on other sites More sharing options...
HaloTechnology Posted July 8, 2016 Share Posted July 8, 2016 @J95 I tried to install the new forceware but I always get " Installation failed " so I tried with 369.39 and it worked immediately so something must be wrong with new mod or something else I have Win 10 970M with Optimus ( do you think optimus is the problem ? ) How can i Help you to fix it ? Quote Link to comment Share on other sites More sharing options...
J95 Posted July 8, 2016 Author Share Posted July 8, 2016 35 minutes ago, HaloTechnology said: @J95 I tried to install the new forceware but I always get " Installation failed " so I tried with 369.39 and it worked immediately so something must be wrong with new mod or something else I have Win 10 970M with Optimus ( do you think optimus is the problem ? ) How can i Help you to fix it ? Device manager, please post HWIDs. Custom vBIOS? Quote Link to comment Share on other sites More sharing options...
HaloTechnology Posted July 8, 2016 Share Posted July 8, 2016 @J95HWID "PCI\VEN_10DE&DEV_13D8&SUBSYS_05AA1028&REV_A1 PCI\VEN_10DE&DEV_13D8&SUBSYS_05AA1028 PCI\VEN_10DE&DEV_13D8&CC_030000 PCI\VEN_10DE&DEV_13D8&CC_0300" Hardware BIOS name "\_SB.PCI0.PEG0.PEGP" not really but @Prema had to make a special bois for me because I had different Board ID Please let me know if you need more info Quote Link to comment Share on other sites More sharing options...
J95 Posted July 8, 2016 Author Share Posted July 8, 2016 IDs are ok (nvcvi.inf), maybe you deleted the wrong folder(s) incl disabling DSE. Quote Link to comment Share on other sites More sharing options...
HaloTechnology Posted July 8, 2016 Share Posted July 8, 2016 Not really because when it didnt work I tried to install the older one and it worked without restart . I tried with the folder with everything , like the screenshot + optimus and just like the screenshot nothing worked . I feel is something related to windows but again the older one worked I must be done something wrong :? I am not sure what it is Quote Link to comment Share on other sites More sharing options...
J95 Posted July 9, 2016 Author Share Posted July 9, 2016 Then try using previous inf w/ current drivers. Anyone else having issues w/ AW17 Optimus 900M? ----------------------------Updated---------------------------- @_ALL if you are enjoying @Prema's work, please consider making a contribution here. Much appreciated! Quote Link to comment Share on other sites More sharing options...
SStratman Posted July 11, 2016 Share Posted July 11, 2016 Sorry if this is a dumb question but I wanted to try out your drivers and have a M18Xr1 with 2 Clevo 780M's. Do I use the .INF from the Alienware or Clevo section? Also do I need to set PEG in my bios or do those instructions just apply to the newer systems with the Optimus stuff? Quote Link to comment Share on other sites More sharing options...
Codenamefa Posted July 13, 2016 Share Posted July 13, 2016 Just a little eye candy for those who are wanting the most out of there M18x R2 with 980m Sli. http://www.3dmark.com/3dm11/11409376 - #1 Position.Using Johnksss and Slv7's vbios with the its clocked +20/+400 and CPU@44x 10 VID. Here is a screen shot of the Intel XTU.Needless to say I think this is about all it can run with the throttlestop set like this. Turned on of course Also you can no longer check the multiplier or it causes throttling on the 980 for some reason. And this is how I'm getting the scores. And if I get to 4.5ghz it will draw more than the 330w can handle. 3 Quote Link to comment Share on other sites More sharing options...
djcgeez2189 Posted July 15, 2016 Share Posted July 15, 2016 can we get the mod for the new driver? Quote Link to comment Share on other sites More sharing options...
J95 Posted July 15, 2016 Author Share Posted July 15, 2016 GeForce 368.81 *Install drivers at your own risk* Windows 10 + GeForce Drivers are Killing Samsung and LG Notebook LCD Display Panels Uninstall both PrecisionX & MSI Afterburner (Keep RTSS) including screen overclocking tools *Still at risk* Requirements: Flash latest @Prema's v2 980M & 970M (Please consider donating to Prema) Win10/8.1 'F8' Boot options 'Safe Mode' & 'Disable driver Signing' cmd (Admin) bcdedit /set {default} bootmenupolicy legacy -> reboot -> F8 -> select 'Disable Driver Signature Enforcement' -> Install drivers Run DDU "Clean & Shutdown (Safe Mode) Extract driver using 7-Zip Display.Driver folder, copy/overwrite the proper .inf file Extracted driver package >> delete the following folders as shown below (don't skip this step) -> run setup.exe >>> Keep these folders only <<< INF MOD v368.81 nv_dispi.inf (including nvdmi.inf) PEG/Dedicated All Models: M15x, M17x, AW17 R1, M18x, AW18 R1 (including Optimus/M17xR4) excluding AW 2015 - GTX 980 , 980M , 970M , 965M , 880M , 870M , 860M , 780M , 770M , 765M , 680M , 675MX , 670MX , 660M nvcvi.inf: Optimus Alienware 17 / 05AA (only) GTX 980M - 970M - 965M GeForce 368.81 Win 7/8.1 GeForce 368.81 Win10 Alienware Laptops nv_dispi.inf_v368.81_Win7_8.1_PEG_Dedicated_Alienware.zip nvcvi.inf_v368.81_Win7_8.1_Optimus_Alienware_17.zip nv_dispi.inf_v368.81_Win10_PEG_Dedicated_Alienware.zip nvcvi.inf_v368.81_Win10_Optimus_Alienware_17.zip Clevo Laptops (non-Optimus) nv_dispi.inf_v368.81_Win7_8.1_PEG_Dedicated_CLEVO.zip nv_dispi.inf_v368.81_Win10_PEG_Dedicated_CLEVO.zip 900M Throttling workarounds: M18xR2 Flash @Swick1981 [Bios Mod] M18xR2 - Legacy Support now Available M18xR2 980M workaround Hibernation method HERE and HERE @HaloTechnology try nvcvi.inf above. @SStratman nv_dispi.inf above (Alienware Laptops). Set PEG to enable SLI in NVCPL. 3 Quote Link to comment Share on other sites More sharing options...
bloodhawk Posted July 16, 2016 Share Posted July 16, 2016 Thank you for the amazing drivers @J95 , @Mr. Fox Told me about these, im one of the bloaks from NBR, figured id come say thank you! http://www.3dmark.com/spy/21671 http://www.3dmark.com/fs/9225544 http://www.3dmark.com/fs/9224955 1 Quote Link to comment Share on other sites More sharing options...
HaloTechnology Posted July 16, 2016 Share Posted July 16, 2016 (edited) @J95 Man you are awesome , It worked perfectly no problem and I didnt even use DDU for install I simply upgraded I should really do some benchmarks Did some benchmarks I got 12306 in firestrike v1.1 720p <<<<<<<is that good ? I got 7100 in 1080P PS: something interesting I noticed that TDP usually before was around 35% but now it's only around 25% ( maybe the new vBIOS ?) ? although the Clock speed is full I dont think there is throttling ? what is a way to know if my card is throttling ? Edited July 17, 2016 by HaloTechnology 1 Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.