Jump to content
J95

[Alienware - Clevo - MSI] Aftermarket Upgrades Driver Support - Modded INF

Recommended Posts

Please follow the instructions below.

• Specs.

• Device manager ->Display Adapters ->Details ->Device Description ->Hardware Ids, post results (request).

- Extract downloaded driver using 7-Zip/winrar.

- Extracted Nvidia...International\Display.Driver folder\ -> copy/overwrite nvdmi.inf

- Nvidia...International folder\ -> run setup.exe

- Windows 8 - disable driver signing

Command Prompt (Admin) Win key + X Type:

 
bcdedit /set {current} testsigning yes

-> "The operation completed successfully" ->reboot ->Install drivers.

Exit test mode, cmd (admin).

 
bcdedit /set {current} testsigning no

->reboot.

- Use DDU to remove previous drivers/GPU installations (Nvidia & AMD), create restore point then select first uninstall option (safe mode).

GeForce 334.89 WHQL

Modded nvdmi.inf v334.89 AW M17XR2/R3/R4 3D + M18XR1/R2 GTX 680M / 780M

Modded nvdmi.inf v334.89 AW M18XR1/R2 GTX 680M / 780M SLI Enabled

- - - Updated - - -

Quadro Notebook Driver 334.95

PhysX 9.13.1220

- Extract

- Nvidia...International folder\ -> delete the following folders:

Display.NView

Display.Update

Display.Optimus

NVWMI

- Display.Driver copy/overwrite nvdmwi.inf

- Nvidia...International\ -> run setup exe

- Install Physx -> reboot

Fire Strike NVIDIA GeForce GTX 780M video card benchmark result - Intel Core i7-3940XM,Alienware M17xR4

[

nvdmwi.inf_v334.95_AW_M17XR2_R3_R4_3D_M18XR1_R2_GTX_680M_780M.zip

nvdmwi.inf_v334.95_AW_M18XR1_R2_GTX_680M_780M_SLI_Enabled.zip

  • Thumbs Up 9

Share this post


Link to post
Share on other sites
- Download GeForce 334.89 WHQL

- Extract driver 7-Zip/winrar

- Display.Driver folder -> open nvdmi.inf (notepad) Edit -> Replace -> Find What: 05AE Replace With: 0490 -> Hit 'Replace All' -> Save.

- Nvidia 334.89...International folder\ run setup exe.

Repeat using 335.23 instead.

Share this post


Link to post
Share on other sites

Share this post


Link to post
Share on other sites

I have been trying to use these mod ini files for versions 320.49, 335.23, and 337.88 but I'm never able to pass the compatibility check, it is always saying could not find compatible graphics hardware. I am downloading the drivers from NVidia and then using 7zip to extract the download exe to a folder which I then am downloading the modified ini files and putting them in the Display.Driver folder overwriting the file with the larger mod file, then I go up a folder level and am running setup.exe as admin but I'm never getting past this compatibility check. Anyone know what I am missing or failing to do? Thanks for the helps

Share this post


Link to post
Share on other sites

Hi @magusstorm, welcome to T|I.

- Device manager -> Display adapters -> Details -> Hardware Ids. Post result.

- Specs?

Share this post


Link to post
Share on other sites

Hi thanks for responding, my hardware ids are as follows:

PCI\VEN_10DE&DEV_11A0&SUBSYS_04BA1028&REV_A1

PCI\VEN_10DE&DEV_11A0&SUBSYS_04BA1028

PCI\VEN_10DE&DEV_11A0&CC_030000

PCI\VEN_10DE&DEV_11A0&CC_0300

The device instance path is: PCI\VEN_10DE&DEV_11A0&SUBSYS_04BA1028&REV_A1\4&361D66C5&0&0008

my machine is a m17x r3 running Win 7 SP 1 and recently has been reformatted and bios was updated to a12. the gpu I'm installing is a gtx 680m. I have 11A0 strings in my inf files, but none have the 04BA1028 SUBSYS value.

This is what is in my inf file for the 11A0 values:

%NVIDIA_DEV.11A0.0270.1558% = Section135, PCI\VEN_10DE&DEV_11A0&SUBSYS_02701558

%NVIDIA_DEV.11A0.0271.1558% = Section139, PCI\VEN_10DE&DEV_11A0&SUBSYS_02711558

%NVIDIA_DEV.11A0.0371.1558% = Section135, PCI\VEN_10DE&DEV_11A0&SUBSYS_03711558

%NVIDIA_DEV.11A0.0372.1558% = Section139, PCI\VEN_10DE&DEV_11A0&SUBSYS_03721558

%NVIDIA_DEV.11A0.5105.1558% = Section098, PCI\VEN_10DE&DEV_11A0&SUBSYS_51051558

%NVIDIA_DEV.11A0.7102.1558% = Section098, PCI\VEN_10DE&DEV_11A0&SUBSYS_71021558

  • Thumbs Up 1

Share this post


Link to post
Share on other sites

That worked to get the driver installed, but it has a problem showing in device manager:

Windows has stopped this device because it has reported problems. (Code 43)

Share this post


Link to post
Share on other sites

Really sorry, I'm not sure why it is redirecting me to the downloads page, but even clicking on it from the downloads page is just taking me back to the downloads page. I tried to find it thru google and the link I chose took me to a new thread: http://forum.techinferno.com/alienware-m17x-aw-17/2279-%5Bm17x-r3%5D-bios-a12-unlocked-sata-tweak.html

but that link took me to a page saying that the downloads have moved and are now hosted on tech inferno forum pages and the link it provides takes me to the downloads page where I seem to be stuck in a loop

Share this post


Link to post
Share on other sites

OK managed to flash the bios and gained access to a second advanced menu but when I changed SG to PEG and F10 reboot the system came back and lit the screen but it was all black. I heard the windows chimes in the background and knew everything booted fine except the black screen. I had to pull the card out in order to view anything again. I guess this means something happened to the card and it isn't working now :(

Share this post


Link to post
Share on other sites

- Under Programs and Features, uninstall everything Nvidia related.

- BIOS, disable IGP.

- BIOS, set display to PEG.

- Install drivers nvdmi.inf v337.88

Share this post


Link to post
Share on other sites

Could I be missing a step in bios? By disable IGP you mean change the display from SG to PEG and that is it? Whenever I am setting the display to PEG from SG and press F10 to save the pc reboots and when it comes back on the screen lights up but remains all black, I can hear windows boot in the background but I can't actually see anything and I have to unseat the card in order to view anything on screen again.

Share this post


Link to post
Share on other sites

You need to disable the integrated graphics (HD3000) and set display to PEG.

post-3012-14494997774856_thumb.png

post-3012-14494997774094_thumb.png

Share this post


Link to post
Share on other sites

Unfortunately that also caused the black screen with no view and windows booted in the background. When I unseated the card to get back into bios the machine started to beep a series of 6 beeps. I had to put the old video card back in to get past that.

Share this post


Link to post
Share on other sites

With IGP disabled and PEG enabled are you able to see the BIOS screen?

Try cleaning the golden connectors and if needed reseat the card a couple of times, boot into safe mode (F8) and uninstall drivers.

Share this post


Link to post
Share on other sites

No, in every case when I select the PEG instead of SG the screen goes black but not dark for everything. The ROM messages on startup don't show, if I hit F2 during the loading nothing displays, if I just let it boot normal I can hear windows load but cannot see anything. It always takes to unseat the card to get any display back. I've gotten the drivers to load several times but in each case when Device Manager sees the card it sees it with the error 43, and if I force it to be used I end up with the black lit screen

Share this post


Link to post
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now

  • Similar Content

    • By ounces
      After spending significant time and effort to obtain "DC" screen for 8770w (which is essentially a regular IPS panel with fancy board that converts 8bpc LVDS to 10bpc DP), I have finally got and installed one. All works great, except of the one problem...

      It has pretty bad banding / posterization in lower shadows. I have tried profiling it in different modes (full range, sRGB, rec709) - issue persists, and it indeed shows only in the lowest part of the characteristic curve. Mids and highlights are represented fine and show low deviation from reference values.

      GPU is HP K4000M, Nvidia drivers installed "as it is", video-card is identified without a hitch.
      Banding was not present with the original TN panel using the same GPU.
       
      While checking a software side, I have noticed that Win10 has bit depth set to 8-bit...
       

       
      My initial reaction was, - "Easy, let's change it in `nvidia-settings` and we're all set":

      ...but that would be too easy, right? After selecting 10bpc and clicking "Apply" screen went off and back on, only to show that depth stayed at 8bpc. Repeating the above few times yielded exactly the same result and I'm not in a hurry to meet a cliched (and laymen) definition of insanity.
       
      Let's check GPU-Z. So far so good, nothing unusual. Notice the highlighted BIOS version and subvendor string:
       
      Time to delve into other tabs. We are running WDDDM v2.4 which supports GPU dithering, but hey... BIOS version has changed!
       
      Briefly back to `nvidia-settings` to check what is reported by vendor's own utility:

       
      So far, we have two strings for BIOS version:
      80.04.5A.00.02 (let's call it an "A") 80.4.33.0.37 (let's call it a "B")  
      Notice how 2nd one seems to not follow hexademical notation. Lastly, "NVIDIA BIOS" drop-down, reports "A" version:
       
      ...and monitor section which confirms that rig is indeed capable of 10bpc, but currently running at mere 8bpc:

       
      Windows "Adapter settings", reports version "B". It's 2019, diversity is a must.

       
      "NVidia inspector" is of the same opinion:

       
      Now, let's use some seriously legit tools and check-in exported BIOS file in `nvflash`:

       
      Here we have two three interesting findings:
      Reported vendor is Dell, not an HP. See this link for details. BIOS version is back to "A". Have I already mentioned diversity? MXM module uses MX25L2005 flash storage in WSON-8 packaging. If things go real nasty, we should be able to rescue a patient via Pomona clip and external programmer.  
      Loading the same file in "Kepler BIOS tweaker" confirms the facts:

       
      EDID settings, courtesy of NVidia Control Panel. Hex dump can be found at the bottom of this post.
      ...Shall I be worried about "60.02Hz" refresh rate?
       
      To summarize:
      Why two different BIOS versions are reported? Anything to do with UEFI (e.g. HP is sideloading its own during boot)?.. Why two different vendors reported? As far as I remember, this is branded HP GPU. Where to get "clean" BIOS of K4000M for future experiments? Ideally from 8770w equipped with "DreamColor" panel from a factory.  
      Link to the dumps, BIOS ROM and monitor EDID: https://mega.nz/#F!zGgRmQIL!9q2QFZtHuK2RQ-WHXMA4Mg (also attached to this post)
      K4000M.zip
    • By Blocker35
      Hi guys, bit of a rookie to the whole EGPU scene. Currently I have:
       
      - MacBook Pro 2015 13inch (3.1GHz Core i7 16GB RAM)
      - Razer X Core 
      - Apple TB3 to TB2 Adapter
      -  TB2 Cable (Cable Matters)
      - 23inch AOC External Monitor
       
      I am wonder about what graphics card to get to run X-Plane11 with high graphic settings?
      I have purgewrangler set up and ready to use with an AMD graphics card, but am also open to the idea of an Nvidia graphics card.
      Any advice appreciated. I did not buy a Windows PC as I need a Mac for various other things and wanted an all-in-one laptop.
    • By BAKED
      Hey y'all! I'm planning on releasing BIOS mods for the newer MSI laptops.
      So I'm looking for some testers to evaluate my mods and give input.
      If you're interested just PM me and we'll take it from there 
    • By BAKED
      There are several threads on requesting BIOS modifications here on T | I but I thought another one wouldn't hurt.
       
            Your request should look like:
      Brand Model Type of modification(For example: Unlocked, added support, Logo, microcode, ME firmware etc  
      I'll respond as soon as I have time as I'm also currently working on other projects(Requests by PM is also ok)
      If anyone else have the knowledge and time feel free to respond to requests 
       
×

Important Information

By using this site, you agree to our Terms of Use. We have placed cookies on your device to help make this website better. You can adjust your cookie settings, otherwise we'll assume you're okay to continue.