So, i got a strange situation here. I have an old Asus ROG G751JM laptop connected to an old Samsung monitor (Model S20C301L) through a VGA connection.
This monitor supports both DVI-D and VGA inputs, while my laptop can output through VGA, HDMI or Thunderbolt/Mini DIsplayport. I wanted to upgrade to digital signal, so i bought an Thunderbolt/Mini DIsplayport to DVI cable.
At first, it was a nightmare. There was absolutely nothing i could do to get it to work. I spent hours troubleshooting, but the monitor just could not detect any signal, only VGA one. But then this happens.
I was testing with only one connection at once and i got tired of plugging and unplugging the cables every time. So i had the idea to keep both cables plugged in and change the source detection in monitor's menu when i wanted to. So, with the TB/MiniDP cable already connected, i've then connected the VGA cable (while DVI was selected as input source). The display started flashing. After 2 seconds, voilà, it was working. And i was like, "what the f***???" I've then unplugged the VGA cable, signal lost. Plugged it again, got digital signal.
Well, i'm happy that it's working now, but i simply don't understand what's happening here. Why is that i need both connections simultaneously to make it work? WIll that still happen if i use a HDMI to DVI cable?
Fun fact: the image displays only after windows startup. So, if i want to enter BIOS setup for example, i need to switch back to VGA as input source.
Sorry for my english.
Update: Can't run games with It, i get bsod.
hello everyone, I have a MSI GT683R with a dying (pretty much dead actually) GTX560M in it.
I am looking to upgrade it to a new GPU, I have found a AMD Firepro M6100. (I first wanted to upgrade to a GTX970M, but that's too expensive for now... and corona is also making things difficult) I have already ordered a second heatsink to modify because I didn't want to modify the original heatsink it came with.
But, my question is. Does it even work in this system? I have heard of people getting it to work in the barebone variant of this system. But I am not sure if it would work in the 'fully loaded' variant.
Also, my games are mostly RAM/CPU dependent and I am looking for a little extra power in this system. I have found a I7-2860qm and I want to upgrade to 32GB of RAM, is it possible on this system? the sticker says 'max. 16GB of RAM' But I have feeling it says that due to the limitation of the cpu that's already on this system (I7-2630QM, 16GB RAM max.)
(EXP GDC Beast v8.4d mPCI-E + GTX970 + ATX PSU) eGPU project for Lenovo IdeaPad Z710, i7-4700MQ, 16GB RAM, SSD, GeForce GT745MBy damianalex
I want to show you my new project.
I bought my laptop about 5 years ago. It was never speed deamon, but for every day use, it was enough to me.
Nvidia GeForce GT745M
512 SSD Adata SU800
Yesterday I bought Witcher 3. Of course on 1080p it's impossible to play, because of about 10fps
So I make a decision to buy external grahpic card.
I choose GTX970 and now I am looking for occasion to buy it.
I've already bought EXP GDC v8.4d mPCI-E. It is used and cost about 30$.
I will use ATX PSU to supply graphic card, because I have old desktop PSU at home.
1) unlock bios
2) buy GTX 970
3) enjoy Witcher 3!
BTW I try to cool down my laptop, so I replaced thermal paste to Kryonout Thermal Grizzly and make some tests. Temperatures and fps are on screenshots.
1) laptop on table, playing GTA V 1080p
- first minute (GPU core 1045MHz)
-after some time, because of high temperature and GPU throlttling (GPU core drop down even to 400MHz)
2) with thermalpad Glacier NC400 SilentiumPC
- 30 minute and longer (GPU core drop to about 900MHz)
3) without down case of laptop (like on picture with thermal paste) on thermalpad.
Here laptop never drops down MHz and max temp are about 72 Celsius degrees.
Bacause of that I bought second down case for my laptop and I will cut there additional holes.
I will describe next step when I get all stuff I need!
I am trying my Sager NP 9377 to get to work but to no avail. NO POST, NO DISPLAY.
in short>> powering on laptop causes fans to run at full speed after 10(cpu only) + 10 (now both cpu+gpu) with Caps Lock + Num Lock + Scroll Lock LEDs blinking, continuous 1 second beep, repeats for one minute with 1 second in between, then laptop shuts down.
System Specs are i7 4810mq 8gb gtx 880m SLI variant (though my laptop has other GPU Slot empty so only singular 880m running) 120 Hz display.
> if i take out the battery and plug in AC only, the power light comes on ORANGE
if both battery is connected, then i have both power and battery light ORANGE
and if only battery is connected then of course laptop is waiting for me to press the power button
but in all 3 cases the following happens
> Pressing the power button brings laptop to some signs of life, power LED turns green, both the CPU and GPU fans have a very quick jerk but does not spin., keyboard lights up with Blue Backlight (dont know if this is relevant or not), HDD activity light starts to blink showing HDD access maybe (even when hdd is removed)
> Display remains blank (i dont even sense the display backlight being on)
> HDD activity light sometimes goes off after only 1-2 seconds, sometimes shows rapid blinking/activity for 4-5 seconds
> both fans remain off (i removed back cover to check this)
> after about 10 seconds or so, the CPU fan spins up (speed is normal, just like when using the laptop in IDLE)
> after 10 more seconds have passed, the CPU fan seems to be turning off for a split second then both the CPU and GPU fan turn on full speed with a lot of noise.
> Caps Lock, Num Lock and Scroll Lock LEDs all blink together with single beep for about 1 second, repeats beep with 1 second in between.
> goes on for about 1 minute then laptop shuts down.
> forcing the fans to spin down using FN+1 key makes them spin back up to full speed after a split second (dont even know why i tried this one -_-)
What I Have Tried So Far
> EC and Bios Reset (take out battery, disconnect AC Adapter, disconnect CMOS Battery, Press Power Button for upto 30 seconds)
> Change Ram and check all available slots
> Repaste CPU/GPU and clean out fans
> Checked GPU...... Flashed the 880m in this Sager with MSI vBios and tested it in a MSI Gt70 2PC i have, gpu ran fine, tested with FurMark, AC Odessey, Ghost Recon Wildlands for over an hour (unfortunately the cooling in my MSI is not good enough it already runs hot, and this 880m causes thermal throttling as well as power limit throttling sometimes). Reflash 880m with original Clevo vBios and put back into the Sager, still no boot, same results as before.
> Checked the CPU..........checked the 4810mq in the MSI GT 70 which worked fine, as well as tried the 4810mq from the MSI in the Sager, still no boot.
> Suspected bad GPU fan connection......therefore forced both fans to full speed as soon as i press power button (using FN+1 Keys) and both fans turn on full speed, same results.
> tried charging the battery to the max before turning on on battery only, same results.
>>------- The laptop has had some random shutdowns in the past too during gaming but would turn back on fine after waiting for 10 mins or so, then i sold it to some guy who brought it back to me the next day saying that it just turned off during gaming and wont turn back on, i returned his money, did all the troubleshooting above to no avail. then i finally put it aside to wait until i get some other system in which i can test the CPU and GPU.
Then one day i turned it on (after leaving it untouched for a couple months), same results as above, i decided to try once without battery and it Freakin Turned ON!!!, used it for a couple days without battery, played a few games (thermal throttling was observed here and there), but then this happened again and this time it seems permanent . And now i have not only repeated all the steps above but this time also checked the CPU and GPU in the MSI GT70 too. ------------<<
> touching the CPU heat pipes feels warm, but the GPU heat pipes are colder (GPU never even booted?). dont know if this is normal or not.
> i replaced one of the capacitors near the CPU once, but i did use the laptop for quite a while after that without any issues.
> my Idle temps were always below 40c for both CPU and GPU, so an overheat warning as soon as laptop is powered on seems unlikely (false overheat warning?, but GPU does not even seem to be detected/ booted as heat pipes remain cold to touch), also i repasted the CPU and GPU multiple times.
> The guy who sold me the laptop told me that the power adapter was originally a Dell, and it was modified to use with this Sager by replacing the cable with a 4-Pin one from a Toshiba (same pinout as the Sager), but then again i have used this laptop for quite a while on the same adapter.
> From day 1 of having this laptop, some keys on the keyboard (w, s, t, c and numpad 4) did not work 99% of the time. pressing really hard on any one of them sometimes made ALL of them work for a while. any thoughts on this issue?? (even if its unrelated).
So what seems to be the issue here?
GPU not detected ?, False temperature alert?, Bad fan?.
Any help towards resolving this will be greatly appreciated.
Thanks in advance .
I created a case for egpu using 2.5mm acrylic sheets. The first time I created a case to support a GPU + ATX psu
Now I created another one for the GPU with an external Xbox 360 203w psu.
the finish was not good but for my use it is already good.
*both cases album
*Construction of the second case
*adapting xbox psu to 8pin power (taken from 24pin)
all made by hand with the tools I had.