Jump to content
EwinRacing Flash Series Gaming Chairs
Hilariousz

HELP ASUS G751JY - Motherboard chip burned. Replaceable?

Recommended Posts

Hello, my laptop motherboard chip is suddenly burned, is there any possibilities to fix or replace the component?

The picture is just for example. thanks

20161209_121803.jpg

Share this post


Link to post
Share on other sites
1 hour ago, Hilariousz said:

The picture is just for example.

 

Are you saying that the picture is not of your motherboard and what you want to replace?

Share this post


Link to post
Share on other sites
6 minutes ago, Khenglish said:

 

Are you saying that the picture is not of your motherboard and what you want to replace?

I had an Asus G751JY, the 2 chip that i mark in circle is burned. i didn't take a original photo from my motherboard because dont want to make confusion. and i'd like to ask if that chip burned is there any possibility to fix by replacing it with new one? or the motherboard already dead too?

 

Because if i replace the whole motherboard with newer one should be very expensive.

Share this post


Link to post
Share on other sites
1 hour ago, Hilariousz said:

I had an Asus G751JY, the 2 chip that i mark in circle is burned. i didn't take a original photo from my motherboard because dont want to make confusion. and i'd like to ask if that chip burned is there any possibility to fix by replacing it with new one? or the motherboard already dead too?

 

Because if i replace the whole motherboard with newer one should be very expensive.

 

If you have a hot air gun and can locate a source for replacement chips its definitely doable. Laptop motherboards are very good at shutting down when components fail to prevent additional damage.

 

How do you know those chips failed?

Edited by Khenglish

Share this post


Link to post
Share on other sites
30 minutes ago, Khenglish said:

 

If you have a hot air gun and can locate a source for replacement chips its definitely doable. Laptop motherboards are very good at shutting down when components fail to prevent additional damage.

 

How do you know those chips failed?

After repaste cpu and gpu, My laptop won't turn on and then i smell something burnt. so i decided to teardown my laptop again, disconnect the battery from motherboard and found those small chips is burned.. other components is still good physically

Share this post


Link to post
Share on other sites

Maybe better if you buy new motherboard, you can find it on ebay with good price.

Share this post


Link to post
Share on other sites
On 12/9/2016 at 4:23 PM, Hilariousz said:

Hello, my laptop motherboard chip is suddenly burned, is there any possibilities to fix or replace the component?

The picture is just for example. thanks

20161209_121803.jpg

Hi 

You can replace the parts only if you have the correct equipment.

You need to have a micro soldering station and more  and its not cheap to setup and also you need to know how to solder and test the damaged parts in order to  fix  your problem .

 

I suggest if you have a damaged motherboard it would be cheaper to buy a motherboard from eBay one without problems.

 

if you mess around trying to fix the damage motherboard it may end up coasting much more than a replacement from eBay.

 

Edited by tomy22

Share this post


Link to post
Share on other sites

Sorry to bump an old thread, but did you get the laptop working again?
I'm trying to learn electronics repair, and would be interested to buy your old motherboard if you swapped it for a new one. :) PM me

Share this post


Link to post
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.


  • Similar Content

    • By Zoarilamb
      I fiddled around with modding my laptops BIOS to unlock XMP profiles and hopefully seeing if optimus could be disabled. After flashing my modded bios and trying it out, I noticed that my keyboards backlight no longer turns on. I was unaware it requires an official BIOS to function. They backlights wont turn on unless ASUS ATK package is installed but now it seems it also needs an official BIOS?
       
      The modded ROM and tool I used if anyone has any experience with this and doesn't mind telling me what to enable/disable, or anything else i can do to re-enable them 
        
    • By mstfa
      i want an unlocked bios.
      laptop: ASUS ROG G751JL
      GPU: GTX 965M with 2GB GDDR5
      stock bios rom: https://drive.google.com/file/d/1OiB61aGlFyfDYpN5e61Fo31x7OdyQg5H/view?usp=sharingGM204.rom
      i want it to be able to overclock it even more for gaming.
    • By dido
      Need help to modify BIOS of asus G75VW to use GTX 670MX...
       
      hello everybody. I want to put my gtx670mx in my asus g75vw ... but at the boot i get black screen... But the graphic card work properly on g75vx...
      Please is there somebody who can help me to do the process ? or to do it for me ? mp me please.... Dido
       
    • By rubendeus
      Hello!
       
      I have a notebook Asus X550CC.
      Some weeks ago my screen went black with the brightness working though (black screen but one can see brightness changes) - I couldn't figure out the root of the problem, since it was sudden and it works with an external monitor.
      Now, I was trying to install an SSD with a caddy. I went to BIOS to change the boot order, but couldn't find my SSD - so, I accidently disabled launch CSM option hoping it would recognize it or something. After that I couldn't access BIOS anymore and I have a very slow startup with dxgkrnl.sys, wdfilter.sys and CAD.sys showing not loaded in the boot log.
      I tried to:
      Remove CMOS battery for 8h  Short JRST2001 and JRST2002  Access BIOS through windows 10 troubleshooting None of the above worked for me
      The laptop does not restart or shuts down correctly as it gets stuck somewhere and I have to press ON/OFF button again in order to shut it completly. The only display I can see in the external monitor, during start-up is the windows 10 loading screen (can't see the asus loading screen) and it takes more than 5 minutes to get me there (seems like a bootloop).
       
      I hope someone may have the answer cause I'm running out of solutions 
       
      Thanks in advance, everyone!
    • By Soapy
      I reversed the input polarity on my m15x jack after a botched psu repair. Computer worked fine, but overall power control is messed up. System only boot on both battery and psu, no battery charge, and a very low battery drain (arround 6wh).
       
      I aways had battery issues whith my 8 years old m15x after my original battery died. Bought a new one two years ago, didn't work. Checked on upower, basically no info on manufacturer, power or history. So i refunded and used the system hooked on the psu as usual. In August i bought a new one, worked flawlessly for a day. The next day the battery died from nowere. Checked upower, bus was ok, battery was charging extremely slowly (6wh), history showed subpar disharge before shutting down. I got mad at this point, decided that psu was to blame. Opened it, checked everything, noticed some wear on the male jack. Resoldered it, connected on computer. Nothing happened, so i checked the voltage. That's when i realised that i screwed up big time. I swaped the positive and negative wires. Decided that one mistake was enough, so i sent my m15x to a trusted repair shop (latter found that they just hooked the battery and gave me back as soon as it booted, they didnt even open it). Got my pc a week later, but the battery didn't charge . Worse, it was slowly discharging (same 6wh as before), and it needed both the psu and the battery to turn on. At 65%, it worked as usual for my college semester, but the battery is dead, and so is my computer. I bellieve i burned some voltage controller or something. I'm pretty competent at soldering thing's (evem smd components) when i know what to do, and i can understand simple circuit's, but when i got my hands on the m15x datasheet i got overblown. I cant make heads or tails about it. I aways lurked this forum and i bellieve your guys are the best when it comes to finding creative solutions to technical problems concerning microelectronics. I followed a guide in this forum as a teenager to upgrade this same computer to a gtx680m, overclocked stuff, got custom bios, and had a lot of fun learning. The m15x is a deprecated platform, but it's a part of my history that i dont want to let go.
      So please guys, help me.
       
×
×
  • Create New...

Important Information

By using this site, you agree to our Terms of Use. We have placed cookies on your device to help make this website better. You can adjust your cookie settings, otherwise we'll assume you're okay to continue.