Jump to content
EwinRacing Flash Series Gaming Chairs
Uuugz

Need help setting up an EXP GDC v.8 + GTX960 for internal display use

Recommended Posts

As the title suggests, I'm having problems making my eGPU (EXP GDC v.8 mPCIe + ASUS GTX960 Turbo OC 2GB) work with the internal display of my laptop (ASUS K56CB, i5-3317U, Gt740M 2Gb discrete gpu, running Windows 10 64-bit in UEFI mode). Done some modifications to the drivers and all that already, the gpu works fine with an external monitor connected via HDMI, however when I try to launch Nvidia control panel while using laptop's display, it says that "You are not currently using a display attached to an  NVIDIA GPU", hence my problem. Drivers i tried were all older than 372.70.  Also, a curious detail i noticed, none of the driver's nvami.inf files contain any listing of GTX960, at all, even though it's supposed to be there as far as I know. I'm probably Any help sorting this out is greatly appreciated. Thanks in advance. 

 

All changes were made to the notebook version of the driver 372.54. My hardware ID is: PCI\VEN_10DE&DEV_1401&SUBSYS_15871043.

In [NVIDIA_Devices.NTamd64.10.0]:

%NVIDIA_DEV.1401.1587.1043% = Section196, PCI\VEN_10DE&DEV_1401&SUBSYS_15871043

 

In [Strings]:

NVIDIA_DEV.1401.1587.1043 = "NVIDIA GeForce GTX 960"

Edited by Uuugz

Share this post


Link to post
Share on other sites

Hi,have you disable the dedicated card?

Optimus is not working with the gt740m in the device manager list.

Edited by dan

Share this post


Link to post
Share on other sites
14 minutes ago, dan said:

Hi,have you disable the dedicated card?

Optimus is not working with the gt740m in the device manager list.

Hi. I believe i tried it, but i'll give it another go. will post as soon  as i do. thanks for a quick response

 

Edited by Uuugz

Share this post


Link to post
Share on other sites

Alright, just DDU'd my drivers in safe mode, disabled the driver signature enforcement, disabled the "other device" in device manager (740m judging by ID) and installed the 372.54 drivers modded with my lines above. After the restart, both the 740m and the 960 had their drivers installed, even though I disabled the prior. 960 works as it used to, and Nvidia control panel gives the same message, so no luck this time...

Maybe I should try removing the 740m from nvami.inf so that drivers for it don't get installed? It's not possible to disable it in BIOS, btw, option is not there. 

Edit: Maybe using the "uninstall" option in the device manager is what I should try?

Edited by Uuugz

Share this post


Link to post
Share on other sites

The 740m need to be eradicated from the displays manager list,you have to see only the igpu and the egpu there.

There is two ways to do that,disable in bios or use x1setup provided by ******.

Sincé none of them is available for you you coud try to disable the pcie that host the gt740m,not the card but the pcie bus that host it in the system device.

Works for me few times. i see you are mod the driver,guess there is no need for that,once you achieved that the system not see the dgpu,you could install the egpu  driver without mod.anything.

 

  • Thumbs Up 1

Share this post


Link to post
Share on other sites

Actually, if the PCI-E lanes used for dGPU and eGPU are different and do not overlap, disabling the portion connected to the 740m might just work (fingers crossed). That's worth a try. Thank you for your time, and again, I'll post once I try doing this.

Share this post


Link to post
Share on other sites

Just tried disabling the part of PCI-E bus that the 740m is connected to, as you suggested, and wiped all drivers, rebooted and installed the modded eGPU ones, however the issue still persists, meaning the 960 doesn't work with the internal display... The 740m is nowhere to be found in the device manager. I will try a few other things, though. Will post as soon as i do. Any suggestions are still appreciated, maybe my driver modding work isn't done properly?

Share this post


Link to post
Share on other sites

Hi,now that you left only the igpu and the egpu,download the driver for the gtx960 from the nvidia website,the last one.let it untouched.

try to install it an let me know what is hapenning.

Edited by dan

Share this post


Link to post
Share on other sites

You mean the latest one? Later than 372.70? Some people posted that anything later than it doesn't work, but I'll try.

Share this post


Link to post
Share on other sites

I am unaware of optimus functionality lately regarding the drivers,try the last one and let me know please.Also i want to know wich operating system are you running.

Edited by dan

Share this post


Link to post
Share on other sites

Currently running Windows 10 64-bit.

13 minutes ago, dan said:

I am unaware of optimus functionality lately regarding the drivers,try the last one and let me know please.Also i want to know wich operating system are you running.

 

Edited by Uuugz

Share this post


Link to post
Share on other sites
18 minutes ago, Uuugz said:

Currently running Windows 10 64-bit.

Try the latest see what hapenning,then try any driver before  372.70 .I am sure you will get the internal screen functionality one way or another. i will take a look inside your bios see what options you have.

Share this post


Link to post
Share on other sites

Tried the latest drivers just now, and nvidia control panel gives the "no monitors connected to an nvidia gpu" message. Will try the older version now.

Share this post


Link to post
Share on other sites
57 minutes ago, Uuugz said:

Tried the latest drivers just now, and nvidia control panel gives the "no monitors connected to an nvidia gpu" message. Will try the older version now.

 

Update: Older drivers such as 372.70 result in the exact same message appearing. Starting to think about getting a monitor...

Share this post


Link to post
Share on other sites
4 minutes ago, Uuugz said:
1 hour ago, Uuugz said:

Tried the latest drivers just now, and nvidia control panel gives the "no monitors connected to an nvidia gpu" message. Will try the older version now.

 

Update: Older drivers such as 372.70 result in the exact same message appearing. Starting to think about getting a monitor...

are you familiarized with upgrading BIOS procedure ?could unnhide the option to disable the dgpu within your bios .

Not recommended if you not have experience with this .....

Share this post


Link to post
Share on other sites

Please make a snapshot of your display manager list and device system list.

Share this post


Link to post
Share on other sites
16 minutes ago, dan said:

are you familiarized with upgrading BIOS procedure ?could unnhide the option to disable the dgpu within your bios .

Not recommended if you not have experience with this .....

No, unfortunately I am not familiar with it, however I have a general idea of how it's done. May try it if everything else fails.

Also,

11 minutes ago, dan said:

Please make a snapshot of your display manager list and device system list.

did you by any chance mean screenshots? because if you actually mean snapshots, i would appreciate it if you told me how to make them

edit: googling it at the moment

Edited by Uuugz

Share this post


Link to post
Share on other sites
11 minutes ago, dan said:

are you familiarized with upgrading BIOS procedure ?could unnhide the option to disable the dgpu within your bios .

Not recommended if you not have experience with this .....

and don´t give up....it is not an option,keep trying drivers and search for documentation in this fórum...i can guarantee that it will work

sorry,screenshots...

windows has a tool that make just that,search "screenshot"in the search box of cortana...

http://www.howtogeek.com/226280/how-to-take-screenshots-in-windows-10/

Share this post


Link to post
Share on other sites

Here's the Device manager, showing the active display adapters and on the second screenshot, the pci-e bus part that I disabled

DEV_MANAGER.PNG

DEV_MANAGER2.PNG

Share this post


Link to post
Share on other sites
1 minute ago, Uuugz said:

Here's the Device manager, showing the active display adapters and on the second screenshot, the pci-e bus part that I disabled

DEV_MANAGER.PNG

DEV_MANAGER2.PNG

ok.it is how it should be.....

Share this post


Link to post
Share on other sites
1 minute ago, dan said:

ok.it is how it should be.....

seems that way. as for the display settings, there really is nothing in there in WIN10

going into display settings - advanced - adapter properties

DISP.PNG

DISP_ADV.PNG

DISP_ADAPT_PROP.PNG

Share this post


Link to post
Share on other sites
2 minutes ago, dan said:

ok.it is how it should be.....

Start thinking that  your dgpu interfiere in some way in the optiumus function,i am quite sure that you will have acceleration in an external monitor but the internal display function it is disabled.

Share this post


Link to post
Share on other sites
2 minutes ago, dan said:

Start thinking that  your dgpu interfiere in some way in the optiumus function,i am quite sure that you will have acceleration in an external monitor but the internal display function it is disabled.

It does work with the external display, I tested. It is the laptop display issues i'm trying to sort out. So yeah,probably optimus' fault in some way. maybe i should try using laptop drivers?

Edit: I'll try asking in the eGPU troubleshooting topic tomorrow, hopefully something will come of it.

Edited by Uuugz

Share this post


Link to post
Share on other sites
4 minutes ago, dan said:

Start thinking that  your dgpu interfiere in some way in the optiumus function,i am quite sure that you will have acceleration in an external monitor but the internal display function it is disabled.

try to install Windows 8.1 driver versión for gtx960...

Share this post


Link to post
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.


  • Similar Content

    • By Rommancen
      Hello. I want to install Windows 10 on my old man msi gt 680. If someone has already done this, please write. What drivers were installed, does turbo boost work normally, does the touch panel work completely? thank
    • By damianalex
      Hi,
      I want to show you my new project.
      I bought my laptop about 5 years ago.  It was never speed deamon, but for every day use, it was enough to me.
       
      Its specification:
      Intel i7-4700MQ
      Nvidia GeForce GT745M
      16GB RAM
      512 SSD Adata SU800

       
      Yesterday I bought Witcher 3. Of course on 1080p it's impossible to play, because of about 10fps
       
      So I make a decision to buy external grahpic card.
      I choose GTX970 and now I am looking for occasion to buy it.
       
      I've already bought EXP GDC v8.4d mPCI-E. It is used and cost about 30$.

       
      I will use ATX PSU to supply graphic card, because I have old desktop PSU at home.
       
      My plan:
      1) unlock bios
      2) buy GTX 970
      3) enjoy Witcher 3!
       
      BTW I try to cool down my laptop, so I replaced thermal paste to Kryonout Thermal Grizzly and make some tests. Temperatures and fps are on screenshots.
       
      1) laptop on table, playing GTA V 1080p

       
      - first minute (GPU core 1045MHz)

       
      -after some time, because of high temperature and GPU throlttling (GPU core drop down even to 400MHz)

       
      2) with thermalpad Glacier NC400 SilentiumPC

      - 30 minute and longer (GPU core drop to about 900MHz)
       
      3) without down case of laptop (like on picture with thermal paste) on thermalpad.
      Here laptop never drops down MHz and max temp are about 72 Celsius degrees.

       
       
      Bacause of that I bought second down case for my laptop and I will cut there additional holes.
       
      Greetings!
       
      I will describe next step when I get all stuff I need!
       
       
    • By popozitos
      Hello everyone
      I created a case for egpu using 2.5mm acrylic sheets. The first time I created a case to support a GPU + ATX psu
      Now I created another one for the GPU with an external Xbox 360 203w psu.
      the finish was not good but for my use it is already good.
       
      *both cases album
      *Construction of the second case 
      *adapting xbox psu to 8pin power (taken from 24pin)
       
      all made by hand with the tools I had.

      from Brazil.

    • By Consumerofmulch
      Hello!
       
      I have recently acquired my Dell Inspiron 15 7000, and I am interested in building an egpu setup for it. It has a USB-C port. Any recommendations/guides out there?
       
      thanks.
    • By Sparkhunter
      Hi there guys,
       
      I've been looking into getting a new GPU for my laptop (4-lane PCI-e) and enclosure (HP Omen Enclosure) but I cannot decided between the RX 5700 XT and the RTX 2070 (non SUPER).
       
      I did some price to performance calculations (higher is better) with some of the best prices I can currently get in the UK.
       

       
      The RX 5700 XT does perform better and is cheaper than the RTX 2070 (Although the 2070 does come with 2 games) but my main concern is drivers and from what I've heard NVIDIA cards work a lot better with eGPUs than AMD.
       
      If anyone has experience using both red & green or if anyone else has any other input i'd love to hear your experiences and input.
       
      Thanks.
       
×
×
  • Create New...

Important Information

By using this site, you agree to our Terms of Use. We have placed cookies on your device to help make this website better. You can adjust your cookie settings, otherwise we'll assume you're okay to continue.