Jump to content
EwinRacing Flash Series Gaming Chairs
kxplus

Does leaving akitio semi-closed run hot? [picture]

Recommended Posts

Its just an aesthetics thing, but I would really love to run my Akitio semi-closed; its just so much neater.

Why semi-closed, you ask? I'm thinking of sliding it up to the point where the 6pin connector sits into my GTX1060 mini–which perfectly fits into the akitio box, except for the 6pin power cable.

But of course theres the issue of hot temperatures. To those with experience with the akitio, do you think it is alright to leave my akitio closed with around 5cm(~2in) of open gap?

picture attached to show you what i mean. Its much cleaner, isnt it? (pardon the small image, I'm limited as i just registered here)

 

Did anyone run any temperature tests and care to share your insights? Thanks a bunch :)

Screen Shot 2016-11-27 at 2.01.33 AM.png

Share this post


Link to post
Share on other sites

Just try it. Every graphics card performs on different temperatures depending on the amount of fans etc. I can only tell that a GTX 970 with fully closed Akitio without modifications to the case runs hot. Your card should be able to breath, so I'd say you'll be fine.

  • Thumbs Up 1

Share this post


Link to post
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now

  • Similar Content

    • By Webshooter38
      Hi all,
       
      I'm debating whether or not to replace the thermal paste in my Lenovo y510p. I've started overclocking a bit, and I have an external fan, but I would like to not have to run the fan as fast because it is a little loud. I have been reading a bit about different thermal pastes, and I'm wondering if there is even a big difference between stock thermal paste, and something like the liquid metal from thermal grizzly. It sounds like it'd work better, but I don't want to fall for a good marketing scheme. If anyone has experience with this and has or hasn't seen big differences, your input would be greatly appreciated.
       
      Thanks in advance!
      -Web
    • By Henrik9979
      First I want to thank the community, who have inspired me to do this project.
      I will give you guys the chance to follow me on this journey.
       
      I hope you will all help me come up with ideas, techniques and parts that could become handy.
       
      This modding may be possible to convert to allot of laptops.
       
      Let's begin!
      Here is the measurement of the went hole.
      77mm X 16mm

       
      I have 2 ideas for what can be done.
       
    • By Arman
      Hello! My name is Arman! I from Armenia, and sorry for my English!
      I have iMac Late 2013 with Intel core i5, 8Gb, NVIDIA GeForce GT 750M 1024 Mb. I have Boot Camp installation on my iMac (now i have 7 Windows, but i can update it to 10 or 8 Windows) 
      I  discover that there is an Akitio 2, wich can use with iMac 2013 for productivity increase. I want to use akitio 2 with GTX 1050 ti 4Gb, but i dont know how it is intalling on iMac?
      Who can write for me the process of installation ALL equipment (akitio 2 + GTX 1050 ti + imac)? What i must to do? I talking about from the very beginning to the very end. 
      PLEASE everyone, help me. You are my last chance !!!!

    • By letobirra
      Hi guys, im selling a modified akitio thunder 2 enclosure with an nvidia zotac 960 ddr5 2gb. I also include the power supply unit, you wont have to do any aditional manipulation.
       
      http://www.ebay.es/itm/322614048182?ssPageName=STRK:MESELX:IT&_trksid=p3984.m1555.l2649
    • By Granty
      Hi guys. I have had my egpu setup and running fine for the past year or so on my mbp (mid 2012) which has a hdd drive.
      I now want to improve the gaming performance, so I've bought an ssd.
       
      I manage to get through all the steps in eGPU Setup 1.2 but when i go through the bootloader, it says at the very end "No bootable device -- insert boot disk and press any key".
       
      I'm guessing it is to do with my ssd being in the optical drive bay location (i assume this is hd1) and the original hdd (hd0) being disconnected, so windows can't see it when in bootloader.
       
      I think I need to edit the config file for the chainloader, so the bootloader reads the ssd but what exactly do i need to change? 
       
      I tried changing the map section (line 55):
      map --harddrives=1
      if "%DRV%"=="C"
       
      map (%FIRSTHDD%) (hd0)
       
      Changing the (hd0) to (hd1) put the bootloader in a loop!? So I am not sure what to try next...
       
      Any help is greatly appreciated!
       
      Thanks
×

Important Information

By using this site, you agree to our Terms of Use. We have placed cookies on your device to help make this website better. You can adjust your cookie settings, otherwise we'll assume you're okay to continue.