Hey everyone! After lots of searching it looks like this is the go-to place for laptop mods online, so I figured this would be the best place to ask something like this.
I picked up a Dell E6530 for basically scrap value, and I love the thing. Runs Xubuntu great, battery is halfway decent, and I can play 99% of the games I own on it. My friend on the other hand picked up an E6440 with its silver-ish finish along the back. As much as I love my 6530 I've gotta say, that thing looks great.
To get to the point now, I was wondering if it's possible for me to polish the top of the lid on my 6530 to have a more silver finish like that (or maybe even a mirror finish if I sand it down with a fine enough grit). Really what I want to know is if the dark grey part of the lid is actually metal. I can't seem to get a definitive answer online, and I tried the magnet test on it and it wasn't magnetic at all. This doesn't necessarily mean it's not metal though, as aluminum isn't magnetic but is obviously a sandable/polishable metal. One source said the laptop has anodized aluminum parts on it, but they didn't specify whether it was something internal or external.
Can anyone here provide me some insight? If the grey part is definitely a metal and not a plastic, I think I'm gonna give it a try. As stated before I got this thing for scrap value, so if in the end it doesn't work out I'm not gonna cry over it or anything. Still though, I'd rather not run into this blind. If this is indeed possible though and I can accomplish what I want with a decent looking result, I'll post up some pictures with the method I used for others to do as well.
Thanks in advance!
I dont know if this is the right forum to post this, (but i need 5 posts for downloading a vbios)
so my questions are these, thank you in advance for reading
I have bought a laptop with a half melted 880M GPU Im assuming the person did not keep an eye on temps,
so i went and replaced the card, it runs fine, (alright) but still, I remember modding my VBIOS for my 680 GTX back in the day, and it was fine, exceptionally faster,
and im looking for that 60 fps LOCK, like i got on my 680 after modding the vbios,
I did increase the voltage on the card to 1.212 I believe, from 1.114 ,
anyway I considering modding the cooling system as well for this laptop, because it definitely lacks cooling
My plan is to put another laptop fan (where the HDD1 bay is in the Alienware 17) bcause I removed that hdd it was constantly at 57c which is bad
even think it suffered some damage as speeds on it for specific games and tasks are pretty long, and it stays at 100% some times, which is weird, but it still works, so im using it.lol
, but in the meantime, I turned the laptop upside down, plugged in the HDMI cable, and now im blasting a ROOM fan at it, which is definitely helping with temps
before I would try to throttle the gpu speed at 77C, or 73C depending on the game or even saying screw it, I dont want throttling, and putting the throttle point to 83C,
I use SPEEDFAN , and it helps keep the laptop relativly cool, except when the gpu is under full load, putting my hand on it is ridiculously hot, so, with the fan on it, its not going above 70,
and taking a LONG time to get up there,
i am playing metro last light at around 60C at 60+ fps, where as before my temps were shooting upto 80 and it would hit the throttle point, so seeing as how this is a 120 HZ laptop, I rather not push it, since the card is not capable (and if it is, the cooling sure isnt)
the plan is to put the fan inside the HDD1 bay, and POSSIBLY daisey chain it to either A) the cpu fan header, or B ) the gpu fan hjeader,
not sure which "rails" the power for these comes from, would it be able to handle another fan???
it seems like a legit idea, seeing as how the rear of the heatsink has NO heat dissipation at all. which is the part that melted offcausing the old card to die in the first place.
basically the thermal pads look like they gunked the card and it was unfixable, I have a post to it on the Alienware Forum, which i could link later,
is it a good idea, and will the VBIOS WORK with my 880M (DELL) from a clevo, (now in an alienware) im assuming they are compatible, as long as they are dell.
also would I be able to get a Y adapter for the inside of a laptop fan, that would be AMAZING, i know they sell them for Desktops.
First I want to thank the community, who have inspired me to do this project.
I will give you guys the chance to follow me on this journey.
I hope you will all help me come up with ideas, techniques and parts that could become handy.
This modding may be possible to convert to allot of laptops.
Here is the measurement of the went hole.
77mm X 16mm
I have 2 ideas for what can be done.
I recently cleaned my laptop and changed thermal paste, so GPU has a lot of headroom for OC. At full load it's at 60c. And throttling only starts at 87c for both CPU and GPU.
I searched everywhere, but it seems no one really modded this laptop's VBIOS.
I found one person who does it, but he requires a donation for it. Since I don't have a lot of money I didn't even try to donate and see if it's enough.
So maybe someone can help me out here?
The laptop is with i7-4720HQ downclocked to 3.0 Ghz instead of 3.6 Ghz due to temperatures at full load, 16 GB of DDR3 ram and a GTX 970M 3GB.
Added link for original VBIOS file.
Direct download link from MSI.
Driver version for the lazy - 84.04.26.00.29.
I hope I'm not going to write off-topic;
I own an Acer Predator 15 (G951) notebook, and it never gave me problems before; I've never used the integrated audio jack port because I usually listen to music and other stuff through Bluetooth headphones, but few weeks ago I noticed that putting a jack connector in the jack port only deactivates the sound from the pc speakers, but the headphones don't appear in the "devices" section, and the sound coming out from the headphones is really faint and distorted (only if the system slider of sound is at the maximum level and the sound should be very noisy, when the level is lower I don't hear anything at all). Also, when I put a jack in the microphone jack port of the pc I hear the classic sounds of the jack which touches the pin connectors inside the port, but it doesn't happen with the headphones port. I tried almost everything: I changed a lot of headphones, both phone headphones with a single jack and pc headsets with two jacks (for the headphones and for the microphone) but every time it's the same. I installed and reinstalled a lot of different versions of the audio drivers, both from Acer and the productor (Realtek), and nothing changes, I also tried with Ubuntu and it's the same. What could be the cause, and can the problem be solved without any technic intervention? Anyway the warranty for my pc is still valid, but the assistance should be the very last resource (I should do a backup of everything and format and so on). And, the last question, I flashed a custom VBIOS some time ago, does this compromise the warranty? Should I really reflash the original VBIOS or it's not so likely they're going to check on this?
Thank you all for your attention!