Jump to content
EwinRacing Flash Series Gaming Chairs
Doki

X7200 <-> P570WM GPU Heatsinks

Recommended Posts

Hello,

 

i recently bought a x7200 with one gtx 680m in it. now im planning to upgrade to sli with an other gtx680m.

but i can't find a heatsink with fan.

so the question is: does the p570wm GPU heatsink fit into the x7200? they look very similar. or does someone sell parts of a x7200?

 

thanks in advance

Share this post


Link to post
Share on other sites

GPU heatsink should be pretty much the same, CPU heatsink not!

I'm afraid you won't find it on the market. I am still trying to find a replacement CPU heatsink for my rig. [emoji20]

Share this post


Link to post
Share on other sites
On ‎2016‎-‎10‎-‎28 at 2:04 PM, Doki said:

Hello,

 

i recently bought a x7200 with one gtx 680m in it. now im planning to upgrade to sli with an other gtx680m.

but i can't find a heatsink with fan.

so the question is: does the p570wm GPU heatsink fit into the x7200? they look very similar. or does someone sell parts of a x7200?

 

thanks in advance

 


From what I remember heatsink from the X7200 is a little different and better by the way. Is why I would add another stock one.
In the past I ordered parts from Clevo center in Germany.
I congratulate purchase. Were it not LGA2011 I would choose this model.

Share this post


Link to post
Share on other sites

Congratulations for  your purchase! i have a x7200 (xtreme rock) with a 680M in it, and i'm search for an heatsink for the second gpu too. 

my x7200 is able to run doom 2016 on high details with 30-35 fps...is so good for only one 680m!! 

i'm very curious to see how will work with SLI...

have you overclock your gpu? :frantics:

 

Share this post


Link to post
Share on other sites
On 30.10.2016 at 10:28 PM, Robigarga 88 said:

Congratulations for  your purchase! i have a x7200 (xtreme rock) with a 680M in it, and i'm search for an heatsink for the second gpu too. 

my x7200 is able to run doom 2016 on high details with 30-35 fps...is so good for only one 680m!! 

i'm very curious to see how will work with SLI...

have you overclock your gpu? :frantics:

 

 

thank you buddy!

doom runs great on my gtx680m too. yes, its slightly overclocked: 850 core 2000 memory

with another 680M im pretty sure it runs a lot better.

 

On 30.10.2016 at 10:24 AM, Clyde said:

 


From what I remember heatsink from the X7200 is a little different and better by the way. Is why I would add another stock one.
In the past I ordered parts from Clevo center in Germany.
I congratulate purchase. Were it not LGA2011 I would choose this model.

 

thanks!

 

i found someone who is selling a X7200 Motherboard with a 460M on it. he also offers the heatsink for it. this is the picture i got from him:

it looks different, but he claims that it fits into a x7200. what do you guys think?

 

OFF TOPIC: is there any trading-page/forum/thread on this site? im not very familiar with techinferno yet. thanks

 

clevo.png

Edited by Doki

Share this post


Link to post
Share on other sites

You need to know the code on it...it seem the heatsink of the clevo d900.. very similar, but under the fan have a different chopper line layout (it doesn't have the line that goes back to the little chips and ram)..if  is cheap i'd buy it to give a try..

Share this post


Link to post
Share on other sites
20 hours ago, Robigarga 88 said:

You need to know the code on it...it seem the heatsink of the clevo d900.. very similar, but under the fan have a different chopper line layout (it doesn't have the line that goes back to the little chips and ram)..if  is cheap i'd buy it to give a try..

 

so i found a other heatsink (for 25€ :rofl:) which is pulled from a X8100. as far as i know, it can be modified to fit into a x7200.

 

i will let you know if it really fits and how it performs under gpu load.

 

8 hours ago, Clyde said:

It is not a GPU heatsink from X7200.

Ask them http://www.clevo-computer.de/  for a right one.

You can find a part reference number in service manual on this forum.

 

i already asked them. they don't have it anymore in stock.

Edited by Doki

Share this post


Link to post
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.


  • Similar Content

    • By depmixels
      hello everyone, I have a MSI GT683R with a dying (pretty much dead actually) GTX560M in it.
       
      I am looking to upgrade it to a new GPU, I have found a AMD Firepro M6100. (I first wanted to upgrade to a GTX970M, but that's too expensive for now... and corona is also making things difficult) I have already ordered a second heatsink to modify because I didn't want to modify the original heatsink it came with.
       
      But, my question is. Does it even work in this system? I have heard of people getting it to work in the barebone variant of this system. But I am not sure if it would work in the 'fully loaded' variant.
       
      Also, my games are mostly RAM/CPU dependent and I am looking for a little extra power in this system. I have found a I7-2860qm and I want to upgrade to 32GB of RAM, is it possible on this system? the sticker says 'max. 16GB of RAM' But I have feeling it says that due to the limitation of the cpu that's already on this system (I7-2630QM, 16GB RAM max.)
    • By BAKED
      BAKED BIOS FOR TM, KM, DM, P6, P4 SERIES WITH MOST MENUS AND OPTIONS UNLOCKED PLUS OTHER MODIFICATIONS
       
      NEW:
      I HAVEN'T BEEN ACTIVE IN A WHILE BUT I MIGHT FIND SOME TIME SOON TO WORK ON AND RELEASE NEW MODS.
      I STARTED WORKING ON V3.0 A WHILE BACK WHICH WILL INCLUDE UPDATED UEFI DRIVERS, MICROCODE, BIOS SCREEN SHOT SUPPORT AMISCE SUPPORT(For some models) PLUS MORE. 
      ALL TM, KM AND DM SERIES ARE V2.0 AND NOW HAVE WINDOWS FLASHER INSTEAD, JUST EXTRACT AND RUN FLASH.BAT
      WARNING! BIOS FLASHING IS RISKY SO MAKE SURE YOU KNOW WHAT YOU'RE DOING BEFORE PROCEEDING. 
      FLASHING THE WRONG BIOS OR INTERRUPTING THE FLASHING PROCESS WILL BRICK YOUR SYSTEM! 
      USE AT YOUR OWN RISK!
      TM, KM AND DM SERIES
      P6 AND P4 SERIES
      INSTRUCTIONS
       
    • By qamar198
      Hello Everyone,

      I am trying my Sager NP 9377 to get to work but to no avail. NO POST, NO DISPLAY.
      in short>> powering on laptop causes fans to run at full speed after 10(cpu only) + 10 (now both cpu+gpu) with Caps Lock + Num Lock + Scroll Lock LEDs blinking, continuous 1 second beep, repeats for one minute with 1 second in between, then laptop shuts down.

      IN DETAIL
      System Specs are i7 4810mq 8gb gtx 880m SLI variant (though my laptop has other GPU Slot empty so only singular 880m running) 120 Hz display.

      The Problem
      > if i take out the battery and plug in AC only, the power light comes on ORANGE
      if both battery is connected, then i have both power and battery light ORANGE
      and if only battery is connected then of course laptop is waiting for me to press the power button
      but in all 3 cases the following happens
      > Pressing the power button brings laptop to some signs of life, power LED turns green, both the CPU and GPU fans have a very quick jerk but does not spin., keyboard lights up with Blue Backlight (dont know if this is relevant or not), HDD activity light starts to blink showing HDD access maybe (even when hdd is removed)
      > Display remains blank (i dont even sense the display backlight being on)
      > HDD activity light sometimes goes off after only 1-2 seconds, sometimes shows rapid blinking/activity for 4-5 seconds
      > both fans remain off (i removed back cover to check this)
      > after about 10 seconds or so, the CPU fan spins up (speed is normal, just like when using the laptop in IDLE)
      > after 10 more seconds have passed, the CPU fan seems to be turning off for a split second then both the CPU and GPU fan turn on full speed with a lot of noise.
      > Caps Lock, Num Lock and Scroll Lock LEDs all blink together with single beep for about 1 second, repeats beep with 1 second in between.
      > goes on for about 1 minute then laptop shuts down.
      > forcing the fans to spin down using FN+1 key makes them spin back up to full speed after a split second (dont even know why i tried this one -_-)

      What I Have Tried So Far
      > EC and Bios Reset (take out battery, disconnect AC Adapter, disconnect CMOS Battery, Press Power Button for upto 30 seconds)
      > Change Ram and check all available slots
      change/remove HDD
      > Repaste CPU/GPU and clean out fans
      > Checked GPU...... Flashed the 880m in this Sager with MSI vBios and tested it in a MSI Gt70 2PC i have, gpu ran fine, tested with FurMark, AC Odessey, Ghost Recon Wildlands for over an hour (unfortunately the cooling in my MSI is not good enough it already runs hot, and this 880m causes thermal throttling as well as power limit throttling sometimes). Reflash 880m with original Clevo vBios and put back into the Sager, still no boot, same results as before.
      > Checked the CPU..........checked the 4810mq in the MSI GT 70 which worked fine, as well as tried the 4810mq from the MSI in the Sager, still no boot.
      > Suspected bad GPU fan connection......therefore forced both fans to full speed as soon as i press power button (using FN+1 Keys) and both fans turn on full speed, same results.
      > tried charging the battery to the max before turning on on battery only, same results.

      >>------- The laptop has had some random shutdowns in the past too during gaming but would turn back on fine after waiting for 10 mins or so, then i sold it to some guy who brought it back to me the next day saying that it just turned off during gaming and wont turn back on, i returned his money, did all the troubleshooting above to no avail. then i finally put it aside to wait until i get some other system in which i can test the CPU and GPU.
      Then one day i turned it on (after leaving it untouched for a couple months), same results as above, i decided to try once without battery and it Freakin Turned ON!!!, used it for a couple days without battery, played a few games (thermal throttling was observed here and there), but then this happened again and this time it seems permanent . And now i have not only repeated all the steps above but this time also checked the CPU and GPU in the MSI GT70 too. ------------<<


      Some Observations
      > touching the CPU heat pipes feels warm, but the GPU heat pipes are colder (GPU never even booted?). dont know if this is normal or not.
      > i replaced one of the capacitors near the CPU once, but i did use the laptop for quite a while after that without any issues.
      > my Idle temps were always below 40c for both CPU and GPU, so an overheat warning as soon as laptop is powered on seems unlikely (false overheat warning?, but GPU does not even seem to be detected/ booted as heat pipes remain cold to touch), also i repasted the CPU and GPU multiple times.
      > The guy who sold me the laptop told me that the power adapter was originally a Dell, and it was modified to use with this Sager by replacing the cable with a 4-Pin one from a Toshiba (same pinout as the Sager), but then again i have used this laptop for quite a while on the same adapter.
      > From day 1 of having this laptop, some keys on the keyboard (w, s, t, c and numpad 4) did not work 99% of the time. pressing really hard on any one of them sometimes made ALL of them work for a while. any thoughts on this issue?? (even if its unrelated).

      So what seems to be the issue here?
      GPU not detected ?, False temperature alert?, Bad fan?.
      Any help towards resolving this will be greatly appreciated.
      Thanks in advance .
    • By BasedKnight
      I recently purchased a replacement 980M (Clevo model) for my P770DM-G after the original died, however, after installing the card the laptop doesn't boot. I only get a black screen, and after a couple minutes the fans spin to max before shutting down, which is the same thing that happens when I try to boot it without any gpu at all. I've tried the reset procedure, unplugging, removing battery, and removing CMOS, to no avail. It does beep before shutting down (I counted 22 times exactly). Anyone have any insight as to what the problem is?
    • By TechDrago
      Hi,
       
      I am having some heat issues with the GTX 680m I installed on my Alienware M17x R2 (yes, its old).  Having installed and ran HWiNFO64, it appears that the maximum rpm of the GPU fan is 2560rpm, even when the GPU reached a maximum of 93° Celsius.  The rpm seems low, but what is the maximum rpm of the fan, does anyone have any ideas?
       
      Thanks
       
×
×
  • Create New...

Important Information

By using this site, you agree to our Terms of Use. We have placed cookies on your device to help make this website better. You can adjust your cookie settings, otherwise we'll assume you're okay to continue.