Jump to content
EwinRacing Flash Series Gaming Chairs
  • ×   Pasted as rich text.   Paste as plain text instead

      Only 75 emoji are allowed.

    ×   Your link has been automatically embedded.   Display as a link instead

    ×   Your previous content has been restored.   Clear editor

    ×   You cannot paste images directly. Upload or insert images from URL.

  • Similar Content

    • By damianalex
      Hi,
      I want to show you my new project.
      I bought my laptop about 5 years ago.  It was never speed deamon, but for every day use, it was enough to me.
       
      Its specification:
      Intel i7-4700MQ
      Nvidia GeForce GT745M
      16GB RAM
      512 SSD Adata SU800

       
      Yesterday I bought Witcher 3. Of course on 1080p it's impossible to play, because of about 10fps
       
      So I make a decision to buy external grahpic card.
      I choose GTX970 and now I am looking for occasion to buy it.
       
      I've already bought EXP GDC v8.4d mPCI-E. It is used and cost about 30$.

       
      I will use ATX PSU to supply graphic card, because I have old desktop PSU at home.
       
      My plan:
      1) unlock bios
      2) buy GTX 970
      3) enjoy Witcher 3!
       
      BTW I try to cool down my laptop, so I replaced thermal paste to Kryonout Thermal Grizzly and make some tests. Temperatures and fps are on screenshots.
       
      1) laptop on table, playing GTA V 1080p

       
      - first minute (GPU core 1045MHz)

       
      -after some time, because of high temperature and GPU throlttling (GPU core drop down even to 400MHz)

       
      2) with thermalpad Glacier NC400 SilentiumPC

      - 30 minute and longer (GPU core drop to about 900MHz)
       
      3) without down case of laptop (like on picture with thermal paste) on thermalpad.
      Here laptop never drops down MHz and max temp are about 72 Celsius degrees.

       
       
      Bacause of that I bought second down case for my laptop and I will cut there additional holes.
       
      Greetings!
       
      I will describe next step when I get all stuff I need!
       
       
    • By popozitos
      Hello everyone
      I created a case for egpu using 2.5mm acrylic sheets. The first time I created a case to support a GPU + ATX psu
      Now I created another one for the GPU with an external Xbox 360 203w psu.
      the finish was not good but for my use it is already good.
       
      *both cases album
      *Construction of the second case 
      *adapting xbox psu to 8pin power (taken from 24pin)
       
      all made by hand with the tools I had.

      from Brazil.

    • By Consumerofmulch
      Hello!
       
      I have recently acquired my Dell Inspiron 15 7000, and I am interested in building an egpu setup for it. It has a USB-C port. Any recommendations/guides out there?
       
      thanks.
    • By Sparkhunter
      Hi there guys,
       
      I've been looking into getting a new GPU for my laptop (4-lane PCI-e) and enclosure (HP Omen Enclosure) but I cannot decided between the RX 5700 XT and the RTX 2070 (non SUPER).
       
      I did some price to performance calculations (higher is better) with some of the best prices I can currently get in the UK.
       

       
      The RX 5700 XT does perform better and is cheaper than the RTX 2070 (Although the 2070 does come with 2 games) but my main concern is drivers and from what I've heard NVIDIA cards work a lot better with eGPUs than AMD.
       
      If anyone has experience using both red & green or if anyone else has any other input i'd love to hear your experiences and input.
       
      Thanks.
       
    • By duffman_777
      Managed to find a relatively cheap MSI 1070 on ebay, and after reading a few success stories that 1070's are compatible I decided to pull the trigger. 
       
      Modified the bottom case as per the photo on this FAQ page http://www.eurocom.com/ec/faqs(272)ClevoP150EM_SagerNP9150_XMG_P502_PRO. Things were going well until I went to screw the card down and felt some resistance.
       
      Oops. Looks like that capacitor(?) with the blue on it *just* clashes with the card. Now what's weird is not all P150em motherboards seem to have this component on it - looking at replacements this component is not there. Also looking at the photos from this 1080m P150em mod (https://premamod.wordpress.com/2017/10/10/clevo-pascal-mxm-standard/), this component isn't there either. Does anyone know what this is, and if it can be removed? Or, if this could be taken off and shifted out of the way somehow, or replaced with a smaller equivalent...?
       
      In my disbelief/annoyance/problem solving when trying to push it down, I did notice that the card has a surprising amount of flex in it and it *can* be screwed down almost completely to a level where I feel somewhat comfortable in doing... Though I'd rather not put this strain on the card if there is a way to avoid it.
       
       
       
       
       



×

Important Information

By using this site, you agree to our Terms of Use. We have placed cookies on your device to help make this website better. You can adjust your cookie settings, otherwise we'll assume you're okay to continue.