Jump to content
Apologies for the spam Read more... ×
EwinRacing Flash Series Gaming Chairs
  • ×   Pasted as rich text.   Paste as plain text instead

      Only 75 emoji are allowed.

    ×   Your link has been automatically embedded.   Display as a link instead

    ×   Your previous content has been restored.   Clear editor

    ×   You cannot paste images directly. Upload or insert images from URL.

  • Similar Content

    • By Webshooter38
      Hi all,
       
      I'm debating whether or not to replace the thermal paste in my Lenovo y510p. I've started overclocking a bit, and I have an external fan, but I would like to not have to run the fan as fast because it is a little loud. I have been reading a bit about different thermal pastes, and I'm wondering if there is even a big difference between stock thermal paste, and something like the liquid metal from thermal grizzly. It sounds like it'd work better, but I don't want to fall for a good marketing scheme. If anyone has experience with this and has or hasn't seen big differences, your input would be greatly appreciated.
       
      Thanks in advance!
      -Web
    • By IronPancakes
      Hey guys, first post, but I thought I’d discuss my heatsink fan retrofit in my old M14x r1. 
       
      Old fan was loud and not very efficient: the air transfer rate was around 2 cfm (I’m assuming cubic feet per minute). Finally had enough and decided to swap out the crappy r1 fan/coughing pinwheel for a r2 fan (rated at 10.4cfm). 
       
      I found an old r2 heat sink on eBay (beware though that the heat sink for the r2 will NOT fit the gpu/cpu configuration for the r1. HOWEVER, the fan of the r2 heat sink it is attached to is a carbon copy fit into the r1 MoBo. A few philips head screws and a seal of good electric tape and BAM, you’ve got a significantly cooler and MUCH quieter intake fan in your old R1. 
       
      My CPU temps from before were around 87-88 max load in FSX, 65 for the GPU; bear in mind this is after a repaste. Now with the new fan, I’m not going over 77 degrees on the CPU, and the gpu stays around 58, all while being MUCH quiter. I’ll post pics of the walkthrough if anyone is interested.
       
       Just thought I’d share with all you fellow loonies trying to squeeze every last frame and degree out of our “portable toaster ovens with a screen and keyboard”. 
       
       
    • By Henrik9979
      First I want to thank the community, who have inspired me to do this project.
      I will give you guys the chance to follow me on this journey.
       
      I hope you will all help me come up with ideas, techniques and parts that could become handy.
       
      This modding may be possible to convert to allot of laptops.
       
      Let's begin!
      Here is the measurement of the went hole.
      77mm X 16mm

       
      I have 2 ideas for what can be done.
       
    • By kxplus
      Its just an aesthetics thing, but I would really love to run my Akitio semi-closed; its just so much neater.
      Why semi-closed, you ask? I'm thinking of sliding it up to the point where the 6pin connector sits into my GTX1060 mini–which perfectly fits into the akitio box, except for the 6pin power cable.
      But of course theres the issue of hot temperatures. To those with experience with the akitio, do you think it is alright to leave my akitio closed with around 5cm(~2in) of open gap?
      picture attached to show you what i mean. Its much cleaner, isnt it? (pardon the small image, I'm limited as i just registered here)
       
      Did anyone run any temperature tests and care to share your insights? Thanks a bunch

    • By IggyDerp
      Hello everyone, I am currently having an issue with my gpu's factory temperature limit (78 degrees c) for my 680m in my M17x R3. I've been unable to get a program that allows me to adjust its setting, I currently have MSI Afterburner, which allows me to clock my gpu' and its memory with no problem but the other options such as the voltage, power limit (which the temperature slider is attached to) and other options are grayed out and unable to be manipulated. I did get the M17x R3 unlocked bios from the forum and have enabled the overclock feature but the result remains the same. I also tried nvidia inspector, and throttle stop but none of them seem to be able to raise or even manipulate the temperature. I have even tried triggering the overclock eula in MSI but the results are still the same. I'm not sure what other information to provide with my issue because I am currently at a loss of where to even begin anymore, I am not a pro at this by any means so any help would be appreciated.
       
       




×

Important Information

By using this site, you agree to our Terms of Use. We have placed cookies on your device to help make this website better. You can adjust your cookie settings, otherwise we'll assume you're okay to continue.