Hi there guys,
I've been looking into getting a new GPU for my laptop (4-lane PCI-e) and enclosure (HP Omen Enclosure) but I cannot decided between the RX 5700 XT and the RTX 2070 (non SUPER).
I did some price to performance calculations (higher is better) with some of the best prices I can currently get in the UK.
The RX 5700 XT does perform better and is cheaper than the RTX 2070 (Although the 2070 does come with 2 games) but my main concern is drivers and from what I've heard NVIDIA cards work a lot better with eGPUs than AMD.
If anyone has experience using both red & green or if anyone else has any other input i'd love to hear your experiences and input.
Hi guys, bit of a rookie to the whole EGPU scene. Currently I have:
- MacBook Pro 2015 13inch (3.1GHz Core i7 16GB RAM)
- Razer X Core
- Apple TB3 to TB2 Adapter
- TB2 Cable (Cable Matters)
- 23inch AOC External Monitor
I am wonder about what graphics card to get to run X-Plane11 with high graphic settings?
I have purgewrangler set up and ready to use with an AMD graphics card, but am also open to the idea of an Nvidia graphics card.
Any advice appreciated. I did not buy a Windows PC as I need a Mac for various other things and wanted an all-in-one laptop.
To anyone wondering about eGPUs on M6700s, its not too complicated, there is just a process that must be done on boot every time:
You need to have the eGPU connected and powered on before booting the laptop, once you get to the Intel RAID screen disconnect the eGPU and wait for windows to load up, once windows is loaded reconnect the eGPU and you *should* be able to use it and be able to hot-swap it (though you should disable it in windows before unplugging it) installing the normal AMD drivers worked fine for me, though the original release of Adrenaline 19.1 blue screened the first time.
I usually run with 3 1080p monitors attached to the 480, replaced my old i5 desktop with this laptop due to the convenience of storing everything on one machine, the laptop has a 256gb SSD and 2x 750GB hdds in raid 0, there is a 2TB WD black attached to the eSATA on the dock.
eGPU and external HDD are powered by a 500W evga desktop ATX psu, the EXP GDC's ATX power adapter was clunky and broke while trying to use it, so I just plugged in a CPU 4 pin cable upside down to power it, not worried about it because the bulk of power is coming from the 8 pin on the GPU anyway.
Help me Tech Inferno, you're my only hope.
Ok so firstly, apologies for yet another 8 beeps thread. I must have read 100 of them over the last week. I feel like I'm missing something obvious, but I'm totally burned out after days of working on this so would appreciate some outside perspective.
I live in the UK, so I've avoided buying a 980m to upgrade my 660 for years to due the price/import tax etc. I finally found a good priced 980m on Ebay a few weeks ago so I thought why not give my trusty 18x r2 a few extra years of life.
I ordered the 100w heatsink, x bracket etc from Eurocom at the same time and everything arrived on the same day.
Here's what I've done so far in the last 7 days:
-Flashed unlocked A11 BIOS (I rolled back to Dell A11 first)
-Removed 660m and installed 980m
-With BIOS in Legacy, Installed Windows 7 on a new SSD with BIOS set to IGFX
-Tried to switch to PEG but got 8 beeps so reset CMOS battery
-Switched to SG and booted to Windows. 980m detected as default hardware. Installed 980m Driver from Eurocom and restarted. Device manager shows 980m working normally along with HD Graphics 4000. Tried PEG again but still got 8 beeps
-Reset battery, booted to Windows and disabled the 980m in Device Manager
-Flashed VBIOS from here (I read that the dell VBIOS doesn't work well so tried Clevo one first, but I've since tried both and a few others)
-Re enabled 980m and restarted Laptop still in Legacy SG.
-Tried to test a game but they only want to use HD Graphics 4000. When I try to open NVIDIA Control Panel and change some settings I get a blue screen and have to restart.
-Tried PEG again, still 8 beeps
I've tried many combinations of drivers, VBIOS and BIOS settings over the last week but the result is mostly the same. I get 8 beeps in PEG. I thought perhaps the seller had sent me a G-sync version as I have read these don't play well with PEG, but I checked the hardware ID (PCI\VEN_10DE&DEV_13D7&SUBSYS_05501028&REV_A1) and what I've read seems to indicate this is the Non G-Sync card.
I got the 980m rather than the 1060 after reading the forums as I saw so many success stories I figured it would be the safer option.
I understand this laptop is basically dead to most of you now, but if any techsperts are around and could give me some other things to try I'd greatly appreciate it.
Привет. Помогите, мне грустно.
Существует clevo p150em, недавно обновленный с 7970 до 8970 м (от 150 см)
Bios, R.2.0 / 1.02.17EC v3b / 1.02.11EC.
Когда он был установлен 7970 м, в BIOS на линии gpu это было 7970 м. После установки 8970m, NVIDIA пишет вместо 8970m.
Драйверы на 8970m не установлены, либо синий экран, либо ноутбук замерзает. Windows 10 1713.
Я пробовал разные версии драйверов, все равно. Что вы посоветуете?
8970m vbios VER015.041.000.000.044964 BR44964.009 it s DELL?
ps. when I bought 7970m for a place of 670m. At 7970m there was also a problem with the drivers, but I somehow skipped it.