I have recently upgraded my laptop(an M6800 firepro 6100) and replaced it with an GTX 980m. Nvidia says that the latest driver(461) supports my card but i can only install up to 388.13 Ive tried to mod it but i can't figure it out. I can run the latest linux driver tho
I have spent a little time in the past few days looking around this site. I would love for someone to point me in the right direction to a forum that has information that could help me out with my problem.
I have a:
Windows 7 Home Premium 64-bit
Intel I7-2820QM 2.3
Bios InsydeH20 Version 1.0 A12
NVIDIA GeForce GTX 460M
(4x) 4 GB Ram
samsung 2.5" 256 SSD (SATA3.0Gbps)
It has been an amazing machine for the last 10+ years. Minor issues, nothing that an Alien Respawn could not fix, till now! On battery power it works just perfect. Then I plug it in and it's all OK until I try to do anything, and then the screen goes white. The screen sometimes goes yellow, sometimes blue, but mostly white screen. It will do nothing until I do a hard reset (holding the power button till it turns off and turn it back on) with the power unplugged. If the power is not unplugged then it will go through boot up to windows swirling dots then go white again. If I plug it in and do nothing I can charge it, unplug and continue what i was doing. I have tried a lot of solutions bouncing around the internet, and thought I was having a DC Jack connection issue (replaced the ac/dc power adapter, then the motherboard). I get a better connection now but with the same white screen result. I stumbled into this forum and I'm hoping to find solutions to my issues. Then upgrade like so many others have.
Any ideas, comments or suggestions welcome.
Thank you in advance!
Hello to all big format laptop users!
I`ll try to make it as short as possible. I have the Alienware M18X R1 for about 7years, i think. It was a problematic machine all the time. But during warranty period local support fixed everything super fast and free of charge :). I even upgraded from gtx 580m sli to gtc 780m sli. And made primary hdd samsung evo ssd. Unlocked Bios. Power brick i changed 3 times by now. Battery once. And 6moths ago one of the long time ago installed 780m died ( started with artifacts on screen then refused to boot windows). Replaced that and was as happy as ever. The machine kept working stable and i pushed all i could get from it in reasonably modern titles. Even tried RDR2 on default settings, gave me 17fps :). Not sure if SLI is supported for that game. The point is it was running fine for last 6 months.
What happened: Gaming as usual, room temp 23C. After around 2hr suddenly black screen. The laptop switched off by itself.
What i check: First checked power brick. Green light off. Unplug from wall and laptop. After plugging in wall green light back on. Connect laptop light off.
Next: Tried take out battery, unplug. And hold the PWR button for 1 min. Try to start on battery - nothing. Plug in - green light off again.
Later: after some googling found that need to try to remove video cards. Done that. OK Nice! Plug in power and it starts as nothing happened on the integrated intel video.
Found out that i one of the video cards is plugged in that triggers the power brick to trip. (the original upgrade 780m from years ago).
Start with GPU: Insert the other one in its slot. Systems start. But immediately i notice there`s no video drivers. OK i think reinstalling and job done. Drivers reinstalled, asked for restart. After restart nothing. Still no driver.
Windows device manager: This is bogging me. it shows that i have 670M instead of 780m. Windows gives Code 43 Error.
BIOS: I go into bios just to find that that it has reverted back to A05 (hows that possible?). And its so limited that i cant even choose witch video card to use. But it detects nVidia GFX.
How to get at least my single 780M to be working?! Update bios again to unlocked? Did this event fry Vbios on my other card maybe?
System: m18x R1
SLI gtx 780m
Unlocked bios (before event)
nvidia driver 443.x(or there about)
Win: 7, 64bit
I am new on the forum. I'd need some help. I own a lenovo ideacentre t540-icb g, and i would need to unlock all the options in my bios, especially overclocking and thermal configuration. I tried with both amibcp and mmtool, but i didn't succeed (Error 18).
I wonder if you could help me or give me some advice.
Thanks in advance.
i'm writing this post to ask you if someone is interested about making for me an overclocked gpu vbios.
I have a Dell M6700 with a NVIDIA K3000M and i' m kinda good with it but i m searching about getting more performance from it.
So basically i want to have a 850 Mhz OC vbios rom and a 950 Mhz OC vbios rom, is there anyone that can do this for me please ?
I tried using kepler vbios tweaker but i remains stuck at 548.9 Mhz without going up and i can t figure how to do it.
I'll attach my VBIOS BACKUP CLEAR COPY.
PS: Tech Inferno seems to have upload problems now so if you want the rom image contact me pls asap