Jump to content
EwinRacing Flash Series Gaming Chairs
  • MSI GTX 1070 MXM successfully working on Alienware M17X R4 (another socket victory against BGA crap)


    An0npl4y

    Hello all here at T|I, I have good news!

     

    OK so it's a lon,g story, I'll try to make it short but I want to give as much informations as possible so it can help anyone interested about such project.

     

    The story is how to go from this (stock 675m):

     

    firestrike-stock.png

     

    To this (MSI GTX 1070 MXM):

     

    firestrike-1070-oc.png

     

    I used to be a gamer when I was younger, then I worked a lot and had no time to play. I came back to gaming last year, and noticed my 2012 M17X R4 was not really up to date for gaming, so it needed to be upgraded. Before you try to do the same, you must be sure you have pretty good knowledge of computer hardware and software, because you may brick your laptop or your GPU in this process, be careful!

     

    In order to get a MSI GTX 1070 MXM fully working on a Alienware M17X R4, you need:

     

    - unlocked BIOS

    - the 120 Hz screen

    - UEFI boot with GPT partition

    - find a MSI GTX 1070 MXM

    - dremel the chassis

    - mod the heatsink so it can fit the GPU

    - make good BIOS settings so you can boot with the new GPU

    - install driver with modded .inf

    - fix GPU throttling issue

     

    OK, let's go for the big upgrade, step by step.

     

    Unlocked BIOS

     

    Eveything you need to know is here: https://www.techinferno.com/index.php?/forums/topic/1516-m17x-r4-unlocked-bios-versions/ Thanks to svl7 for this great share!

     

    120 Hz screen

     

    You can find it on Ebay, for example here: http://www.ebay.com/itm/162380820165?_trksid=p2057872.m2749.l2649&ssPageName=STRK%3AMEBIDX%3AIT

    It's required because pascal GPUs need EDP mode to run. The nice thing is there is one LVDS connector in M17X R4 motherboard, even if you have a 60 Hz screen, so you can make the upgrade.

    It's pretty easy to install, but you may have no boot issue with it, like I had. This is when I had to install unlocked BIOS so I can set graphic settings which let laptop boot with the 120 Hz screen. From what I remember, required setting  was "Primary display" to PEG, see here:

     

    primary-display-peg.JPG

     

    GPT partition and UEFI BOOT

     

    I had MBR partition, and since I'm using my laptop for working I didn't want to reinstall everything. I used a very nice tool to convert my system SSD parition from MBR to GPT called EASEUS Partition Master (they also provide partition and data recovery tools for years, maybe you already know this company): http://www.easeus.com/partition-manager-software/convert-mbr-to-gpt.html

    They offered a discount so is cost me around 30$ to convert without having to reinstall, which is cheap for the time and all datas it saved me.

     

    Then, you just need to make sure your boot options are set to pure UEFI, which means Load Legacy option ROM is disabled, here in the BIOS:

     

    load-legacy-disabled.JPG

     

    I noticed it can't be disabled if you're running a GPU which vbios doesn't have UEFI compliant driver. If this is the case, you'll get the "can't detect MXM card GOP driver" error like this:

     

    gop-driver-error.JPG

     

    Once again, thanks to svl7 you can fix this using vbios with UEFI driver for your GPU: https://www.techinferno.com/index.php?/forums/topic/2079-m14x-r2-m17x-r4-m18x-r2-uefi-fast-boot-secure-boot-gpu-issues-solved/ This is not what I did, I just enabled integrated graphics again (it's UEFI compliant), so I can disable Load legacy option. Then I could put the 1070 in, and boot successfully. With this option enabled, I had 8 beeps "GPU not recognized" error at boot, stuck with no POST like a loser.

     

    GO BUY A GTX 1070 MXM

     

    Here too, you can get headaches. It's expensive, and hard to find. I searched a lot, and I can give you a few advices. For me, you have mainly 3 choices:

     

    - contact Lee James Wood, who is member of this forum and very serious seller: https://www.techinferno.com/index.php?/profile/3501-lee-james-wood/

    You can also check his website: https://store.alezka.com/en/ and his Ebay store: http://stores.ebay.com/woodzstack666?_trksid=p2047675.l2563

    I must say I contacted him, and at one point I had no answer, so I contacted another seller. But he explained me it was because for some reason he didn't received notification from the forum so he didn't knew my message, and missed the sale. But even he was not the seller, he gave me some advices which were really helpful when I was stuck with 8 beeps no boot problem because of the Legacy mode yesterday. Thanks a lot man, maybe you missed this sale but I'm sure you'll get lot of others since you're so helpful, thanks again!

     

    - go buy directly from China, where you can find it much cheaper. You have one chinese marketplace to rule them all: it's called taobao: https://world.taobao.com/

    Problem is if you don't speak chinese, you may have trouble just to get their chat software working, it's same kind as alibaba trade manager for those who knows. So buying from taobao is like entring an unknown area, sellers there mostly only speak chinese, some don't want to sell out of China, so it's really weird to buy from there. But prices are really interesting, for example around 3000 Yuans (410$) for a GTX 1060 MXM, and around 4900 yuans (665$) for a GTX 1070 MXM. If you're looking for a cheap pascal MXM GPU, this may feel like heaven:

     

    taobao-1070-mxm.png

     

     

    -instead of trying to learn chinese, find a way to make dropship. There are lot of companies for taobao drophip, like Yoybuy for example.

    I found a russian MSI forum member whose nickname is Onside182, his name is Andrew and I made the deal with him. He knows Taobao sellers, so he dealt with that for me. He was serious and helpful too, and you can chose to contact him on russian forum: https://forum-ru.msi.com/index.php?action=profile;u=1111063 (you must be registered there to see his profile), or just contact me so I give you his email address, he'll deal for your taobao order and you can pay him with paypal.

     

    Let's make some room inside

     

    Yeah  know it's bad, but honestly I don't care about chassis integrity when it's time to get overkill Firestrike score. So yes, you have to dremel the chassis to make some room so the MSI GTX 1070 will fit in. First, you need to disassemble the whole laptop, so you can get the motherboard out:

     

    m17x-r4-teardown.JPG

     

    You need to remove little sides on the MXM connector, so the card can fit in. Before

     

    mxm-before.JPG

     

    After:

     

    mxm-after.JPG

     

    You must get a modified MXM connector like that:

     

    mxm-connector.JPG

     

    Then you also need to cut part of the chassis, here is the result:

     

    chassis-cut-1.JPG

     

    chassis-cut-2.JPG

     

    Now, you can install the card:

     

    gtx-1070-in.JPG

     

    MOD the GPU heatsink to improve cooling

     

    Here you have 2 ways: keep stock heatsink, and mod it so it can fit as explained here: https://www.techinferno.com/index.php?/forums/topic/10982-m17x-r4-gtx-1060-upgrade/#comment-155003

    Or build a custom made heatsink. This is what I did, I ordered this heatsink with the GPU: https://world.taobao.com/item/540331819333.htm?spm=a312a.7700714.0.0.ZzDuN1#detail%201%20sortie%20sur%20le%20cot%C3%A9%20ok%20et%204%C3%A8me%20stripe%20pour%20cpu%20ok

    It was designed for a MSI computer, but it can be modified for the M17X R4 since copper stripes are soldered horizontally. You need to unsolder it, and solder the copper stripes and radiator from stock heatsink instead. You also need to cut off the part which must cover the CPU heatsink, which is not useful. This way, you have a more efficient heatsink, because it was designed for pascal GPU:

     

    heatsink.JPG

     

    Soldering heatsinks is crap, when you heat one side, you can easily unsolder the other side by mistake because all heat will be transmitted everywhere very quicly. The trick is to put side you don't want to unsolder in water, and heat the other side where you want to unsolder with a torch. But I warn you: soldering this stuff is a real nightmare.

    With my modded heatsink (which is so ugly and crappy I can't even make picture of it for now), I reached 72°C max while benchmarking, which seems to be pretty good temp. Right now writing on forum, GPU temp is at 55°c.

     

    Spend some time finding the good BIOS settings

     

    You'll have to try out some settings, and you may have no boot issues, black screens, and many errors. You'll feel very lonely at this time, I know. But searching forums saved me most of the time! If you're in trouble, just search and ask :)

     

    You can boot? Well you still have to wait a little until it works!

     

    Once we're here, we can boot with the GTX 1070 inside the laptop, and it appears as something like Microsoft basic display in Windows device manager. So we need to download official driver from Nvidia, extract it and mod the .inf file. I used this howto: http://null-bin.blogspot.fr/2015/08/how-to-modify-nvidia-notebook-driver.html

    There are many others, it's well documented on the web.

     

    Lines I added are those ones:

     

    %NVIDIA_DEV.1BE1.057B.1028% = Section408, PCI\VEN_10DE&DEV_1BE1&SUBSYS_057B1028
    
    and
    
    NVIDIA_DEV.1BE1.057B.1028 = "NVIDIA GeForce GTX 1070"

    Then it just installed fine after disabling Windows driver signature enforcement of course. I could even install whole Nvidia Geforce experience stuff.

     

    The GPU POWER LIMIT throttling issue

     

    OK so you think it's installed, now it's over, after all those countless hours searching, testing and tweaking our good old M17X R4? Of course you launch a benchmark, and now you notice another problem. GPU core frequency is good, then it goes low, then it goes high again, then low again... GPU is throttling. I went into HWinfo, and noticed GPU power consumption was going higher than 110W, then I had GPU throttle, it went down around 50W, then it went up again, and so on... I searched and found nothing. I thought it was because I only have 240W PSU and I must change for a 330W one. Then and angel appeared and said to me "Hey, man, this must be a BIOS setting related issue, just fix it". So I went in the BIOS again, and I noticed this setting called "adapter warning". I just disabled it, and now it's running fine. When checking, I can see I still have POWER LIMIT message, but it doesn't slow down GPU frequency, no throttling anymore.

     

    This is the funny part where the 2012 laptop kicks ass to BGA craps

     

    Yeahhhhhhhhhhhh!!! We can say we made it, the MSI GTX 1070 is working in the Alienware M17X R4:

     

    gpuz-1070.gif

     

    Now, please have a look at this latest Alienware 17 R3 (BGA crap) Firestrike result: http://www.3dmark.com/fs/8941795 Yeah I know, this is serious expensive hardware we have here: a 6820HK CPU and a GTX 1070, such Alienware laptop must cost around 2500$, no? Of course, my poor old laptop cannot not beat this beast, what do you think?

     

    SI_Wii_PunchOut.png

     

    Here is benchmak I just made today, with little OC, it's not optimized at all: http://www.3dmark.com/3dm/19201328

     

    Ladies and gentlemen, on the left we have my 2012 M17X R4, and on the right a brand new 17 R3: http://www.3dmark.com/compare/fs/12289770/fs/8941795 :)

     

    To finish, before I can go at last trying to play GTA 5 at maxxed out settings, here are some links which were very useful, and can help if you want to make such mods.

     

    MSI 1070 in Alienware ranger by loafer987: http://forum.notebookreview.com/threads/msi-1070-in-alienware-17-r1-ranger-success.797893/

    German Alienware forum with huge CPU and GPU heatsink mods: http://alienware-forum.de/index.php/Thread/7254-AW-17-R1-CPU-Heatsink-Pipe-Mod/

    http://alienware-forum.de/index.php/Thread/7254-AW17-R1-CPU-GPU-Heatsink-Pipe-Mod/?pageNo=2

    http://alienware-forum.de/index.php/Thread/8042-AW17-R1-3D-120Hz-GTX-980-N16E-GXX/?postID=69530#post69530

    Zotac BOX GTX 1070 MXM in Alienware 17: http://forum.notebookreview.com/threads/alienware-17-r5-gtx-1070-mxm-3-1b.800137/

     

    I hope sharing all those informations helped M17X R4 owners to keep faith in this old good laptop. I'm pretty sure it can also handle a GTX 1080 by the way, if someone is willing to try (I can't be the guinea pig for the next step) it would be nice ;)


    This post has been promoted to an article


    • Thumbs Up 4
      Report Article


    User Feedback




    @An0npl4y For what price does your russian contact sell a gtx 1060? A friend of mine is interested in doing the same upgrade I did, but I got a 1060 from ebay for 650 dollar, he's skeptical about such a high price.

    Share this comment


    Link to comment
    Share on other sites

    You have to deal that with him, but anyway it will be cheaper than on Ebay. Just check prices on taobao, you'll understand what's the real market price of those products in China. Obviously, Ebay prices are much higher.

     

    I changed CPU today, I upgraded to a 3940XM. It's running quite fine while gaming, but in fact even if I can improve Physics score a little when benchmarking, I'm still bottlenecked by 2 things: the 240W PSU which is causing power limit throttling when CPU and GPU are at high load, and air cooling which can't barely deal with such heat to cool down. So next step is setting up a dual 240W PSU, and if it can fix power limit issue then I'll work on the final mod, which could be a full watercooling for CPU, GPU and VRMs. I ordered all components for the dual PSU mod, it should be here in a few weeks.

    Share this comment


    Link to comment
    Share on other sites

    damn dude, your going H.A.M on that bad boy arent ya lol, love the work so far man, i cant help but notice the wifi mod is it? thats on the case in the pic; what do you have going on there?

    I'm also interested in the russian contact if you can pass him my info when you have a spare moment not modding the m17x. looking to provide a cheaper alternative to the high priced parts on ebay where its pay what the want or gtfo. (pardon if that violates any rules i might have missed, if so admin's please edit at will)

    lucked out and got a 765m for 60+ 5 shipping here in the states but most want just under 100 for them and it only goes higher as you go up the performance ladder.

    but my rant aside now lol, can you post up more info on the psu mod when you get it about started? and wasnt there a 330 watt psu for these or was that on the r1/r2 models only?

    Share this comment


    Link to comment
    Share on other sites

    Hello,

     

    You're right, I'm just pushing this good old piece of hardware to its limits biggthumpup1.gif

     

    Yes I also upgraded the Wifi, replacing the 802.11 n miniPCI card for a 802.11 ac one, and I added external antennas: http://www.canardwifi.com/2015/09/23/upgrade-wifi-dun-alienware-m17x-r4-avec-carte-intel-7260-802-11-ac-et-connecteurs-pour-antennes-externes/ (in french, use Google to translate). Now I get higher bandwith and range with that mod, I can also plug in a high gain external antenna letting me reach Wifi networks a few kilometers away if needed.

     

    The PSU mod I want to make is based on @Mr. Fox 330W mod here: https://www.techinferno.com/index.php?/forums/topic/3207-tutorial-dual-330w-ac-adapter-mod/ I will do the same kind of case, but with dual 240W instead of dual 330W, since I already have 2 X 240W PSU, and dual 330W would be overkill for a single GPU laptop. With a single 240W PSU, I'm really on the edge, I really feel like it needs just a little more power. I'll include a wattmeter in the case so I can check current draw. I saw GPU already reached around 115 or 120W when hitting power limit, 3940XM TDP is 55W but with a little overclock it can be much higher. With all components of the laptop powered on, I'm pretty sure it can draw around 280W or more now.

     

    Sure I give you my contact informations, no problem.

    Share this comment


    Link to comment
    Share on other sites

    It's looking pretty good but I'm curious about your decision to do a 2x240 watt psu mod, like you said with the 240 watt you're barely on the edge, but wouldn't a 330 watt psu suffice then? Seems like a lot of effort to do the 2x 240 watt mod, when you can just get a 330 psu. And for the cooling, yeah the 3940xm is a hothead, I'm personally going to add two extra heatpipes to my own laptop to cool the cpu better, would love to see your watercooling project though, but are you going to install the watercooling internally or externally?

     

    Also the link that you provided to the antenna mod doesn't seem to work, it downloads a file for me.

     

    @An0npl4y Could you also provide me with the contact informations? 

    Share this comment


    Link to comment
    Share on other sites

    The reason why I chose this way is I found a 240W PSU for cheap price, and components for the mod are also cheap. So dual 240W PSU mod will cost less than buying a single 330W genuine Dell PSU. And it will also offer higher amperage if needed.

     

    There is not much room enough inside the laptop to make an efficient watercooling mod, so I think pump, tank  and radiator stuff will be outside. I'm mostly using my M17X R4 as a desktop anyway. But I need to be sure power limit problem is fixed before going further in this last upgrade step.

     

    Link for Wifi mod should be OK now.

    Share this comment


    Link to comment
    Share on other sites
    14 hours ago, An0npl4y said:

    You have to deal that with him, but anyway it will be cheaper than on Ebay. Just check prices on taobao, you'll understand what's the real market price of those products in China. Obviously, Ebay prices are much higher.

     

    I changed CPU today, I upgraded to a 3940XM. It's running quite fine while gaming, but in fact even if I can improve Physics score a little when benchmarking, I'm still bottlenecked by 2 things: the 240W PSU which is causing power limit throttling when CPU and GPU are at high load, and air cooling which can't barely deal with such heat to cool down. So next step is setting up a dual 240W PSU, and if it can fix power limit issue then I'll work on the final mod, which could be a full watercooling for CPU, GPU and VRMs. I ordered all components for the dual PSU mod, it should be here in a few weeks.

     

    Taobao prices after adding shipping and Paypal fees end in the 750-800€, on eBay its "only" around 100€, and one or another will be hit hard by customs in my country, so extra 23% VAT over all that :(

    Lets wait for volta to come out to see if Pascal gets cheaper lol.

    Share this comment


    Link to comment
    Share on other sites

    Yes, of course depending of which country you're living in, you may have custom fees, usually it's around same amount as VAT. With some sellers you can negociate declared value so you can avoid having huge fees. I think we'll have to wait next gen GPUs before having a real price drop. Even 980m is still expensive nowadays, MXM cards always had high prices. Even if I found a good deal, I agree buying a GTX 1070 MXM is still very expensive, but I think it's worth the upgrade, my M17X R4 is a real beast now ;)

    Share this comment


    Link to comment
    Share on other sites

    hell you can get a 1070 8 gig on there for what a 980 sells for out here in the states on ebay lol, but look at it this way, it will be the last upgrade that machine would need gpu wise

    pretty sure once the top cpu that works for these starts to bottleneck the card its time to lay the ol girl down and grab and msi and start modding that, altho i'm partial to the asus designs personally

    Share this comment


    Link to comment
    Share on other sites

    Yes you're right, this is like a chinese Ebay with all products cheaper. But buying there is not so easy as on Ebay, this is why it's not so perfect...

     

    I keep my ol girl for now, I still haven't pushed it to the max. I'm aiming for over 14k FS score :frantics:

    Share this comment


    Link to comment
    Share on other sites
    2 hours ago, naightmehr said:

    I'm personally going to add two extra heatpipes to my own laptop to cool the cpu better,

    Something like this?

    Maybe you wanna go on 5 Heatpipes on the GPU Heatsink.

    20160816_175155.jpg

    20160816_192304.jpg

    Share this comment


    Link to comment
    Share on other sites

    @Zoldago Is that your own mod? Looks amazing, and yeah I had something like that in mind, my original plan was to add 2 heatpipes on top of the existing ones, and add a bit more radiator between the fan and current radiator.

    Share this comment


    Link to comment
    Share on other sites

    thats about how i would do it too, just wish these machines had more hight off the bottom or at least a lip to raise the back of it, then i could see about doing some dremeling to the chassis so the top pipes are exposed with some font stenciled on them in vynil to peel off after painting flat black, copper fonts! would look awesome imo lol

    Share this comment


    Link to comment
    Share on other sites
    19 hours ago, naightmehr said:

    @Zoldago Is that your own mod?

    Yes ist my own mod, but it needs a lot of dremel work to the chassis.

    I made it before i get the red R4.

    Share this comment


    Link to comment
    Share on other sites

    Hello,

     

    A few updates, there are some improvements.

     

    So first thing is I made the dual 240W PSU mod, but it's not giving good results. PSU is still seen as 240W by the BIOS, no change at all in benchmark or games.

     

    I installed latest Nvidia driver and had a few crashes with it, so I upgraded from vbios 86.04.2B.00.14 to latest MSI vbios 86.04.56.00.3A from GT73VR 6RE here: https://www.msi.com/Laptop/support/GT73VR-6RE-Titan.html#down-firmware

     

    It seems to fix the problem, but I saw lot of MSI users had same kind of issue even with brand new laptops: https://forum-en.msi.com/index.php?topic=280126.63

     

    So since dual PSU mod gave no results, I tried with 330W PSU. I just tried a Delta electronics 330W PSU from AW M18x. ID chip is well recognized, and it appears at 330W in the BIOS. This is good thing.

     

    Other good thing is now I could just reach my 14k FS score I was trying to achieve for a while: http://www.3dmark.com/3dm/19888925

     

    As you can see, there's not much big improvement with graphics score or physics score, in fact I'm just a little lower. But there is big improvement (around 20% better) with combined score, see 240W high score vs 330W high score comparison: http://www.3dmark.com/compare/fs/12610633/fs/12542431

     

    Also you can notice now my GPU is seen as GTX 1070 in bench results, it seems 3dmark updated their GPU database.

     

    Yeah 14k with a M17x R4! :)

     

    m17x-r4-14k-fs-score.png

     

    The fact is 240W PSU is giving enough amperage to feed CPU or GPU at full load, but not when both are at full load at the same time. Here was the bottleneck. So if you want to make the GTX 1070 upgrade on your M17x R4 you need to buy a 330W PSU, or you'll have PSU bottleneck like I had. It will work, but GPU won't perform 100% when gaming. This is good thing to know.

     

    More than bench result, this is big change when gaming. I noticed GPU load was not high enough, it was around 50% to 80% average depending on game scenes (I'm playing GTA 5). Of course, it was same usage as firestrike combined, when there is load on CPU and GPU at the same time. Now with 330W PSU GPU load is around 85% to 95% average when gaming, so for same settings there is a huge FPS increase, this is really major change. I noticed with 240W PSU I had regular MSI Afterburner voltage limit alerts preventing to get higher GPU load before. I guess this is because power rail could just not feed more amperage, so voltage was getting low and it could not reach required voltage such as needed on frequency / voltage curve. Now there's no more voltage limit alerts anymore, everything seems to run fine.

     

    Since I could reach my 14k target with air cooling, I don't think going for water cooling is really useful and worth the money. It could allow higher CPU overclock, but it won't bring major improvement to the setup. Now I'll just try to work on finding best settings combination for stable and performing gaming, and it will be enough. This M17x R4 is now performing as well as a 2017 brand new 2.5k$ MSI GT73VR 6RE laptop with 7820HK CPU, for real, see just same FS score: http://www.3dmark.com/fs/12002833

     

    This is enough for me, there's nothing much to improve now.

     

    If someone want to make the upgrade on his M17x R4, well it can be done and as you can see the good old M17x R4 can still be up to date against today's laptops, for much cheaper. I hope all informations here will help.

    Share this comment


    Link to comment
    Share on other sites

    Hello,

     

    Yes in fact I made a modded heatsink using M17x R4 100W 3 copper stripes heatsink and a MSI heatsink same as this one: https://world.taobao.com/item/540331819333.htm

     

    When GPU was not at full load, I had temps around 70 to 75°c max while gaming, which was good. But now GPU can go up to max 99% load, it's getting hot as hell! After playing around 15 or 20 minutes, it can reach up to 85°c so I'm at hardware overheat level, this is a problem. I need to find a way to cool it down. I already swapped the 3940XM which is getting way too hot for my previous 3840QM, but it's not changing GPU temp at all. It still increase minute after minute.

     

    I don't know if I should give a try to a cooling pad, or if I'll watercool the GPU, or the whole setup. Maybe I could also try to improve my modded heatsink by adding it a pair of copper stripes.

     

    There is a real thermal problem here. I saw in hwinfo the GPU went up to 125W draw. Even whith modded heatsink, the stock radiator was not designed for that.

     

    The next challenge is to cool down the beast.

    Share this comment


    Link to comment
    Share on other sites

    Yeah the i7 3940xm is a hothead, best you can do to decrease temps is add another heatpipe, lap the heatink and do the m14x r2 fan mod. 

     

    Would love to see some cool heatsink modding if you're planning on doing any :-)

    Share this comment


    Link to comment
    Share on other sites
    On 11/04/2017 at 6:55 PM, An0npl4y said:

     

    I can't download the zip file on the link you provided for the gtx 680m.

     

    any help please ?

     

    also the PEG display is not available on my bios, is that a problem since a have a stock 120hz ? 

     

    Quote

    I noticed it can't be disabled if you're running a GPU which vbios doesn't have UEFI compliant driver. If this is the case, you'll get the "can't detect MXM card GOP driver" error like this:

     

    gop-driver-error.JPG

     

    Once again, thanks to svl7 you can fix this using vbios with UEFI driver for your GPU: https://www.techinferno.com/index.php?/forums/topic/2079-m14x-r2-m17x-r4-m18x-r2-uefi-fast-boot-secure-boot-gpu-issues-solved/ This is not what I did, I just enabled integrated graphics again (it's UEFI compliant), so I can disable Load legacy option. Then I could put the 1070 in, and boot successfully. With this option enabled, I had 8 beeps "GPU not recognized" error at boot, stuck with no POST like a loser.

     

    Share this comment


    Link to comment
    Share on other sites

    Hello,

     

    Sorry I don't understand what you mean. Are you trying to install the 1070 in your M17x R4? What is your issue?

    Share this comment


    Link to comment
    Share on other sites

    Nop the 1060

    But i have the same issue with the legacy boot option rom, i can't disabled it and I get 8 bips on boot with the new card

    So i need the unlocked vbios to do that, i you have a valid link to dl it I'll take that

     

    Also i don't find the PEG display option on the bios menu, so i'm not sur that i have enabled 

    Share this comment


    Link to comment
    Share on other sites

    You should post in the 1060 thread. It's not unlocked vbios that you need, but unlocked bios which is not the same. It's not the video bios, but the laptop motherboard bios. I gave the link to svl7's unlocked bios thread in the first post here. If you have same issue that I had, then you just need to follow steps I explained and it will work fine.

    Share this comment


    Link to comment
    Share on other sites
    Thank you for your answer
    
    if I understood correctly it is necessary to have an unlocked bios (for me it's version A11 I believe, that's what I see under information system).
    So This will solve the problem "can not detect MXM card GOP driver" and allow me to disable load legacy option rom.

    Share this comment


    Link to comment
    Share on other sites

    You should really post in the 1060 thread. You need to make sure you have everything required to run this GPU: GPT partition with UEFI and primary display set to PEG. If you have same issue as I had, you can find all informations in my first post to solve it. Unlocked bios will allow you to modify somme settings you can't change now. When you'll have issue booting the 680m, it will be the right time to put the 1060 in.

    Share this comment


    Link to comment
    Share on other sites



    Join the conversation

    You can post now and register later. If you have an account, sign in now to post with your account.

    Guest
    Add a comment...

    ×   Pasted as rich text.   Paste as plain text instead

      Only 75 emoji are allowed.

    ×   Your link has been automatically embedded.   Display as a link instead

    ×   Your previous content has been restored.   Clear editor

    ×   You cannot paste images directly. Upload or insert images from URL.


  • Similar Content

    • By IveGotRoot
      I have recently upgraded my laptop(an M6800 firepro 6100) and replaced it with an GTX 980m. Nvidia says that the latest driver(461) supports my card but i can only install up to 388.13 Ive tried to mod it but i can't figure it out. I can run the latest linux driver tho
    • By Freddyicy
      I have spent a little time in the past few days looking around this site. I would love for someone to point me in the right direction to a forum that has information that could help me out with my problem.
       
      I have a:
       
      Alienware M17XR3 
      Windows 7 Home Premium 64-bit
      Intel I7-2820QM 2.3
      Bios InsydeH20 Version 1.0 A12
      NVIDIA GeForce GTX 460M
      (4x) 4 GB Ram
      samsung 2.5" 256 SSD (SATA3.0Gbps)
       
      It has been an amazing machine for the last 10+ years. Minor issues, nothing that an Alien Respawn could not fix, till now! On battery power it works just perfect.  Then I plug it in and it's all OK until I try to do anything, and then the screen goes white. The screen sometimes goes yellow, sometimes blue, but mostly white screen. It will do nothing until I do a hard reset (holding the power button till it turns off and turn it back on) with the power unplugged.  If the power is not unplugged then it will go through boot up to windows swirling dots then go white again. If I plug it in and do nothing I can charge it, unplug and continue what i was doing. I have tried a lot of solutions bouncing around the internet, and thought I was having a DC Jack connection issue (replaced the ac/dc power adapter, then the motherboard). I get a better connection now but with the same white screen result. I stumbled into this forum and I'm hoping to find solutions to my issues.  Then upgrade like so many others have.
       
      Any ideas, comments or suggestions welcome.
       
      Thank you in advance!
       
    • By gjbouman@outlook.com
      Hi Everybody,
       
      I am the owner of a HP elitbook 8770W, an old but still very decent notebook.
      I've upgraded the GPU several times , first with a GTX 970M and a while later with a GTX 1070 mobile.
      I've bought those cards from pretty reliable sources (a seller on Ali I know pretty well) and I knew beforehand that the cards were compatible with my 8770w.
      Unfortunately, my 1070 broke down due to heating issues.
       
      Now I can get my hands on a Quadro P5200. The original ones don't have a EEPROM chip soldered on the board, and rely on the notebook VBIOS.
      However, the one I want has a BIOS chip soldered on the board with a HP max-q bios, which would be perfect for me.
      Well, if it's compatible of course.
      The seller cannot give me a statisfactory answer to that and I'm not sure they are willing to refund me if this is not the case.
       
      Now on to my concrete questions:
      Does the build-in notebook VBIOS matter if there is a chip with a bios on the mxm card itself? If it does matter, since my notebook does recognize other pascal cards like the 1070 and 1080, is it wild to assume that a P5200 will also be recognized? They all seem to have a 86.04.x.x.x BIOS. Is there any way to check the notebook VBIOS compatibility against the one on the card?  
      Thank you in advance!
       
    • By Swick1981
      Bios Release Version – v2.0.0
       

       
      Updated or Modded Items:
      A11 UNLOCKED BIOS FOR m18Xr2 (UNLOCKED BY SVL7 AND FULL CREDIT GOES TO HIM FOR UNLOCKING!)
      SVL7 Also created the PRR2.EXE tool that allows you to flash the new bios by unlocking it.  (FULL CREDIT GOES TO HIM FOR THAT FILE PRR2.EXE)
       
      Here are ALL the things I've added, modded, and enhanced on this bios -
      I've added FULL LEGACY SUPPORT ON THIS BIOS with ONE or TWO CARDS (SLI).  You can FINALLY use Win 7 OS on your machine and run the 900 series GPU's! 
      This is a MAJOR breakthrough!
       
      LEGACY SUPPORT Confirmed.  Works with 900 series GPu's in single OR SLI formation Updated the Intel RST Legacy to v12.9.0.2006 (Supports TRIM in RAID0 - CONFIRMED) Updated Intel RST UEFI to v12.9.0.2006 (Supports TRIM in RAID0 - CONFIRMED) Updated the ONBOARD Video Card for the HD3xxx to v2171 - FROM v2132 Updated ONBOARD Video Card for the HD4xxx to v2171 - FROM v2132 Updated the LAN Firmware & PXE Boot from 2.0.5.9 to v2.0.6.6 ADDED NvMe Support for m18xr2 ADDED M.2 support for m18xr2 Updated CPU Microcode to v29 for the 2900 CPU's Updated CPU Microcode to v1c for the 3900 CPU's Updated GOP Driver for Intel Sandy Bridge CPU Updated GOP Driver for Intel Ivy Bridge CPU Updated MAIN GOP Policy module for the m18xR2 Eliminated some code that wasn't used in the m18xR2 Updated CSM Module (v2) Streamline some coding to make mod(s) run a little more efficiently (v2) Added FPARTS.TXT to rar file in v2. (I had forgot to add it in v1) v2.5 to be released shortly.  I've updated a few more modules that I didn't realize could be updated.  (It's only 3 modules, but it's still an update!)   It should be released in about a week.  Hope this helps ya'll!  
      Instructions to flash:
      Use a flash drive to create a boot disk into dos Unzip ALL files into the root of the flash drive (flash.bat, r2final.bin, fpt.exe, flash.bat, prr2.exe, fparts.txt,m18r2.hdr, m18r2.hdr.bin, readmefirst.txt) BOOT INTO DOS – Note, that when you set the bios to legacy in order to boot into dos, you MAY have to reinstall OS!  (Just be prepared to reinstall no matter what) Once you boot into dos, run the file flash.bat It will unlock your bios (THANKS TO SVL7’s BIOS UNLOCKING TOOL – ALL CREDIT TO HIM FOR THIS TOOL!) Let it flash… Reboot your pc, and enjoy the MASSIVE updates!  
      Be on the lookout as I do plan to release newer version with more updates in the future.  However, it wont be for at least a few weeks as I'm now working on legacy support for the m17xR4 and several other systems.  So please be patient!
       
      ENJOY!
       
      Thread link for more information and discussion:
       
    • By svl7
      Files contained in this archive:
      FTP-DOS.zip prr2.zip M18x R2 - BIOS A03 'unlocked.zip M18x R2 - BIOS A08 'unlocked.zip M18x_R2_-_BIOS_A08_-_[unlocked]_-_[IRST 11.0.6.1702].zip M18x_R2_BIOS_A03_-_[unlocked] - [IRST 11.6.0.1702].zip M18x_R2_BIOS_A09_-_[unlocked].zip [FPT]-M18x_R2_BIOS_A09_-_[unlocked].zip [FPT]-M18x_R2_BIOS_A10_-_[unlocked]_V2.zip M18x_R2_-_BIOS_A08_-_[unlocked].zip M18x_R2_BIOS_A03_-_[unlocked].zip  
      For information on how to use the files in this archive, see here:
       
       
      My donation link in case you want to buy me a beer
×
×
  • Create New...

Important Information

By using this site, you agree to our Terms of Use. We have placed cookies on your device to help make this website better. You can adjust your cookie settings, otherwise we'll assume you're okay to continue.