Jump to content
  • MSI GTX 1070 MXM successfully working on Alienware M17X R4 (another socket victory against BGA crap)


    An0npl4y

    Hello all here at T|I, I have good news!

     

    OK so it's a lon,g story, I'll try to make it short but I want to give as much informations as possible so it can help anyone interested about such project.

     

    The story is how to go from this (stock 675m):

     

    firestrike-stock.png

     

    To this (MSI GTX 1070 MXM):

     

    firestrike-1070-oc.png

     

    I used to be a gamer when I was younger, then I worked a lot and had no time to play. I came back to gaming last year, and noticed my 2012 M17X R4 was not really up to date for gaming, so it needed to be upgraded. Before you try to do the same, you must be sure you have pretty good knowledge of computer hardware and software, because you may brick your laptop or your GPU in this process, be careful!

     

    In order to get a MSI GTX 1070 MXM fully working on a Alienware M17X R4, you need:

     

    - unlocked BIOS

    - the 120 Hz screen

    - UEFI boot with GPT partition

    - find a MSI GTX 1070 MXM

    - dremel the chassis

    - mod the heatsink so it can fit the GPU

    - make good BIOS settings so you can boot with the new GPU

    - install driver with modded .inf

    - fix GPU throttling issue

     

    OK, let's go for the big upgrade, step by step.

     

    Unlocked BIOS

     

    Eveything you need to know is here: https://www.techinferno.com/index.php?/forums/topic/1516-m17x-r4-unlocked-bios-versions/ Thanks to svl7 for this great share!

     

    120 Hz screen

     

    You can find it on Ebay, for example here: http://www.ebay.com/itm/162380820165?_trksid=p2057872.m2749.l2649&ssPageName=STRK%3AMEBIDX%3AIT

    It's required because pascal GPUs need EDP mode to run. The nice thing is there is one LVDS connector in M17X R4 motherboard, even if you have a 60 Hz screen, so you can make the upgrade.

    It's pretty easy to install, but you may have no boot issue with it, like I had. This is when I had to install unlocked BIOS so I can set graphic settings which let laptop boot with the 120 Hz screen. From what I remember, required setting  was "Primary display" to PEG, see here:

     

    primary-display-peg.JPG

     

    GPT partition and UEFI BOOT

     

    I had MBR partition, and since I'm using my laptop for working I didn't want to reinstall everything. I used a very nice tool to convert my system SSD parition from MBR to GPT called EASEUS Partition Master (they also provide partition and data recovery tools for years, maybe you already know this company): http://www.easeus.com/partition-manager-software/convert-mbr-to-gpt.html

    They offered a discount so is cost me around 30$ to convert without having to reinstall, which is cheap for the time and all datas it saved me.

     

    Then, you just need to make sure your boot options are set to pure UEFI, which means Load Legacy option ROM is disabled, here in the BIOS:

     

    load-legacy-disabled.JPG

     

    I noticed it can't be disabled if you're running a GPU which vbios doesn't have UEFI compliant driver. If this is the case, you'll get the "can't detect MXM card GOP driver" error like this:

     

    gop-driver-error.JPG

     

    Once again, thanks to svl7 you can fix this using vbios with UEFI driver for your GPU: https://www.techinferno.com/index.php?/forums/topic/2079-m14x-r2-m17x-r4-m18x-r2-uefi-fast-boot-secure-boot-gpu-issues-solved/ This is not what I did, I just enabled integrated graphics again (it's UEFI compliant), so I can disable Load legacy option. Then I could put the 1070 in, and boot successfully. With this option enabled, I had 8 beeps "GPU not recognized" error at boot, stuck with no POST like a loser.

     

    GO BUY A GTX 1070 MXM

     

    Here too, you can get headaches. It's expensive, and hard to find. I searched a lot, and I can give you a few advices. For me, you have mainly 3 choices:

     

    - contact Lee James Wood, who is member of this forum and very serious seller: https://www.techinferno.com/index.php?/profile/3501-lee-james-wood/

    You can also check his website: https://store.alezka.com/en/ and his Ebay store: http://stores.ebay.com/woodzstack666?_trksid=p2047675.l2563

    I must say I contacted him, and at one point I had no answer, so I contacted another seller. But he explained me it was because for some reason he didn't received notification from the forum so he didn't knew my message, and missed the sale. But even he was not the seller, he gave me some advices which were really helpful when I was stuck with 8 beeps no boot problem because of the Legacy mode yesterday. Thanks a lot man, maybe you missed this sale but I'm sure you'll get lot of others since you're so helpful, thanks again!

     

    - go buy directly from China, where you can find it much cheaper. You have one chinese marketplace to rule them all: it's called taobao: https://world.taobao.com/

    Problem is if you don't speak chinese, you may have trouble just to get their chat software working, it's same kind as alibaba trade manager for those who knows. So buying from taobao is like entring an unknown area, sellers there mostly only speak chinese, some don't want to sell out of China, so it's really weird to buy from there. But prices are really interesting, for example around 3000 Yuans (410$) for a GTX 1060 MXM, and around 4900 yuans (665$) for a GTX 1070 MXM. If you're looking for a cheap pascal MXM GPU, this may feel like heaven:

     

    taobao-1070-mxm.png

     

     

    -instead of trying to learn chinese, find a way to make dropship. There are lot of companies for taobao drophip, like Yoybuy for example.

    I found a russian MSI forum member whose nickname is Onside182, his name is Andrew and I made the deal with him. He knows Taobao sellers, so he dealt with that for me. He was serious and helpful too, and you can chose to contact him on russian forum: https://forum-ru.msi.com/index.php?action=profile;u=1111063 (you must be registered there to see his profile), or just contact me so I give you his email address, he'll deal for your taobao order and you can pay him with paypal.

     

    Let's make some room inside

     

    Yeah  know it's bad, but honestly I don't care about chassis integrity when it's time to get overkill Firestrike score. So yes, you have to dremel the chassis to make some room so the MSI GTX 1070 will fit in. First, you need to disassemble the whole laptop, so you can get the motherboard out:

     

    m17x-r4-teardown.JPG

     

    You need to remove little sides on the MXM connector, so the card can fit in. Before

     

    mxm-before.JPG

     

    After:

     

    mxm-after.JPG

     

    You must get a modified MXM connector like that:

     

    mxm-connector.JPG

     

    Then you also need to cut part of the chassis, here is the result:

     

    chassis-cut-1.JPG

     

    chassis-cut-2.JPG

     

    Now, you can install the card:

     

    gtx-1070-in.JPG

     

    MOD the GPU heatsink to improve cooling

     

    Here you have 2 ways: keep stock heatsink, and mod it so it can fit as explained here: https://www.techinferno.com/index.php?/forums/topic/10982-m17x-r4-gtx-1060-upgrade/#comment-155003

    Or build a custom made heatsink. This is what I did, I ordered this heatsink with the GPU: https://world.taobao.com/item/540331819333.htm?spm=a312a.7700714.0.0.ZzDuN1#detail%201%20sortie%20sur%20le%20cot%C3%A9%20ok%20et%204%C3%A8me%20stripe%20pour%20cpu%20ok

    It was designed for a MSI computer, but it can be modified for the M17X R4 since copper stripes are soldered horizontally. You need to unsolder it, and solder the copper stripes and radiator from stock heatsink instead. You also need to cut off the part which must cover the CPU heatsink, which is not useful. This way, you have a more efficient heatsink, because it was designed for pascal GPU:

     

    heatsink.JPG

     

    Soldering heatsinks is crap, when you heat one side, you can easily unsolder the other side by mistake because all heat will be transmitted everywhere very quicly. The trick is to put side you don't want to unsolder in water, and heat the other side where you want to unsolder with a torch. But I warn you: soldering this stuff is a real nightmare.

    With my modded heatsink (which is so ugly and crappy I can't even make picture of it for now), I reached 72°C max while benchmarking, which seems to be pretty good temp. Right now writing on forum, GPU temp is at 55°c.

     

    Spend some time finding the good BIOS settings

     

    You'll have to try out some settings, and you may have no boot issues, black screens, and many errors. You'll feel very lonely at this time, I know. But searching forums saved me most of the time! If you're in trouble, just search and ask :)

     

    You can boot? Well you still have to wait a little until it works!

     

    Once we're here, we can boot with the GTX 1070 inside the laptop, and it appears as something like Microsoft basic display in Windows device manager. So we need to download official driver from Nvidia, extract it and mod the .inf file. I used this howto: http://null-bin.blogspot.fr/2015/08/how-to-modify-nvidia-notebook-driver.html

    There are many others, it's well documented on the web.

     

    Lines I added are those ones:

     

    %NVIDIA_DEV.1BE1.057B.1028% = Section408, PCI\VEN_10DE&DEV_1BE1&SUBSYS_057B1028
    
    and
    
    NVIDIA_DEV.1BE1.057B.1028 = "NVIDIA GeForce GTX 1070"

    Then it just installed fine after disabling Windows driver signature enforcement of course. I could even install whole Nvidia Geforce experience stuff.

     

    The GPU POWER LIMIT throttling issue

     

    OK so you think it's installed, now it's over, after all those countless hours searching, testing and tweaking our good old M17X R4? Of course you launch a benchmark, and now you notice another problem. GPU core frequency is good, then it goes low, then it goes high again, then low again... GPU is throttling. I went into HWinfo, and noticed GPU power consumption was going higher than 110W, then I had GPU throttle, it went down around 50W, then it went up again, and so on... I searched and found nothing. I thought it was because I only have 240W PSU and I must change for a 330W one. Then and angel appeared and said to me "Hey, man, this must be a BIOS setting related issue, just fix it". So I went in the BIOS again, and I noticed this setting called "adapter warning". I just disabled it, and now it's running fine. When checking, I can see I still have POWER LIMIT message, but it doesn't slow down GPU frequency, no throttling anymore.

     

    This is the funny part where the 2012 laptop kicks ass to BGA craps

     

    Yeahhhhhhhhhhhh!!! We can say we made it, the MSI GTX 1070 is working in the Alienware M17X R4:

     

    gpuz-1070.gif

     

    Now, please have a look at this latest Alienware 17 R3 (BGA crap) Firestrike result: http://www.3dmark.com/fs/8941795 Yeah I know, this is serious expensive hardware we have here: a 6820HK CPU and a GTX 1070, such Alienware laptop must cost around 2500$, no? Of course, my poor old laptop cannot not beat this beast, what do you think?

     

    SI_Wii_PunchOut.png

     

    Here is benchmak I just made today, with little OC, it's not optimized at all: http://www.3dmark.com/3dm/19201328

     

    Ladies and gentlemen, on the left we have my 2012 M17X R4, and on the right a brand new 17 R3: http://www.3dmark.com/compare/fs/12289770/fs/8941795 :)

     

    To finish, before I can go at last trying to play GTA 5 at maxxed out settings, here are some links which were very useful, and can help if you want to make such mods.

     

    MSI 1070 in Alienware ranger by loafer987: http://forum.notebookreview.com/threads/msi-1070-in-alienware-17-r1-ranger-success.797893/

    German Alienware forum with huge CPU and GPU heatsink mods: http://alienware-forum.de/index.php/Thread/7254-AW-17-R1-CPU-Heatsink-Pipe-Mod/

    http://alienware-forum.de/index.php/Thread/7254-AW17-R1-CPU-GPU-Heatsink-Pipe-Mod/?pageNo=2

    http://alienware-forum.de/index.php/Thread/8042-AW17-R1-3D-120Hz-GTX-980-N16E-GXX/?postID=69530#post69530

    Zotac BOX GTX 1070 MXM in Alienware 17: http://forum.notebookreview.com/threads/alienware-17-r5-gtx-1070-mxm-3-1b.800137/

     

    I hope sharing all those informations helped M17X R4 owners to keep faith in this old good laptop. I'm pretty sure it can also handle a GTX 1080 by the way, if someone is willing to try (I can't be the guinea pig for the next step) it would be nice ;)


    This post has been promoted to an article


    • Thumbs Up 4
      Report Article


    User Feedback




    here is stock speeds for an AW17 I just modded for the same 1070 version.

    http://www.3dmark.com/3dm/19211309

     

    So as you can see, your 1070 there is performing admirably. In my bench here, the CPU is bottlenecking the GPU maybe up to 10%

     

    Oh another thing, not trying to advertise my services, but when i sell a 1070 or any videocard for that matter, I make sure it has the right vbios on it to avoid having extra issues. 

     

    I do not use SVL7 or Prema vbioses, ours are not overvolted as a means to get them stable, we just use better vbioses. However, I would LOVE to work with Prema or SVL7 but there's been no communication back and forth me and them for so many years...

    Share this comment


    Link to comment
    Share on other sites

    Hello,

     

    The card is latest hardware version, it's VER 1.2 as you can see on PCB:

     

    1070-ver-1.2.JPG

     

    I asked for it because I wanted to have latest hardware, maybe it can make a little difference. Seller asked which vbios I wanted so I told him to put standard MSI vbios, which is working fine. But I saw some MSI users had problems with same vbios, with GT73VR 6RE laptop: https://forum-en.msi.com/index.php?topic=280126.63

    Also MSI released a newer vbios: https://www.msi.com/Laptop/support/GT73VR-6RE-Titan.html#down-firmware but since everything is running fine for now, I have no reason to flash vbios.

     

    I played a little last evening, GPU temps was between 69°c up to 72°c max, so it looks good. I tried little OC but I'm not getting much better FS score, best I did was this one: http://www.3dmark.com/3dm/19208257 I'm only playing with MSI Afterburner settings, I don't want to install vbios which can allow to change voltage. I think this is very high performance for such a laptop, no reason to search for more. This is expensive GPU, I want to protect it.

     

    I think with 330W PSU and a 3940XM CPU, I could improve performance a little more. From what I read, Xtreme CPU can allow to use RAM at 2133 MHz max clock. I have G.Skill Ripjaws DDR3 2133MHz but I have to set RAM frequency lower, at 1867 MHz in BIOS or I get a BSOD one minute after booting.

     

    Anyway, this is good enough for my 5 years old laptop :thumbsup:

    Share this comment


    Link to comment
    Share on other sites

    Wow, Seeing the old machines shining brighter than the castrated BGA crap is really feast. Kudos for the Hardmod and Gratz..!!
    Thanks for the share..

     

    Share this comment


    Link to comment
    Share on other sites

    Thanks biggthumpup1.gif

     

    A little work on the CPU overclock today helped improve this with even higher Firestrike score: http://www.3dmark.com/3dm/19225824 :rofl:

     

    Other good news of the day, my M17X R4 is fully VR ready according to steam test:

     

    steam-vr-bench.png

     

    I don't think I can go higher right now, but keep in mind it's a 2012 laptop here :)

     

    By the way, while tweaking GPU with MSI Afterburner today, I noticed when I use too high settings, there is no artifacts like I was used to with older cards. Driver is just crashing at some point when benchmarking, so I know it's too high and I need to calm it down. Is it normal behavior with Pascal GPUs?

     

    Those cards are still quite recent, I guess in the future vbios tweakers will release optimized vbioses which will allow to really use full power of this kind of GPU.

     

    I think with a 3940XM and optimized vbios it may reach near 14k FS score...

    Share this comment


    Link to comment
    Share on other sites

    Awesome project with a cool result, I also needed a new laptop for my gaming needs but I couldn't say farewell to my old trusty alienware. I personally got the gtx1060 with the 120hz screen and i7 3940xm. Still an awesome result, have fun with your machine! :o)

    Share this comment


    Link to comment
    Share on other sites

    Hello,

     

    Thanks :)

     

    You asked about the unlocked BIOS before editing the post, so I answer about it:

     

    I don't think it's required if you already have the 120 Hz screen. But if you have to make the upgrade from 60 Hz screen to 120 Hz screen, with stock BIOS you can get stuck because some settings are not available. This is why I had to install unlocked BIOS, and it saved me for the 120 Hz screen upgrade. Otherwise, it's not mandatory.

    Share this comment


    Link to comment
    Share on other sites

    Hmm that's pretty weird, because I personally had the 60hz model as well with the AMD HD7970m. Though I had no problems installing the 120hz screen on the 1060, after I installed everything it worked perfectly fine, plug and play. But that does kinda worry me for in the future if my 120hz might act weird. I currently got the normal A12 bios, what's the best way to go to the unlocked bios? If I read svl's thread then I first have to go to Bios A5  using the recovery method, though it's risky and I'd rather not brick my motherboard, what did you personally do @An0npl4y?

    Share this comment


    Link to comment
    Share on other sites

    Hello,

     

    If everything is running fine, there's no reason why you have to flash the BIOS. I had to do it because in my case it was required, since I was stuck and couldn't boot with the 120 Hz screen, but it may not be the same for everybody. I think the need for unlocked BIOS will depend on production date, default settings and default GPU when the laptop was produced.

     

    I followed method 2 described in svl7's thread, so I went directly from A13 to unlocked A11 using the FPT tool, it's very well explained in his thread and you can find all files and required tools.

    Share this comment


    Link to comment
    Share on other sites

    Well Done and great work !!! :frantics:

     

    could you please give us a step by step guide for the installation of this 1070,

     

    I have an m17x r4 120 hz and a gtx 680m and i would like to buy a gtx 1070 and install it on my laptop. 

    Share this comment


    Link to comment
    Share on other sites

    Hello,

     

    @naightmehrYou just need to wait a little, and you'll be promoted so you can have access to all files.

     

    @decool: Thanks, I gave lot of details in my thread which should help you, you can see all required steps so you can have a working GTX 1070 into your M17X R4. I also had a 680m before this upgrade, which was an upgrade from a 675m. If you already have the 120 Hz screen, you need to make sure you're running in pure UEFI and not Legacy (you can see that in BIOS, check my pictures). Then you just have to get a 1070, dremel the chassis and the connectors on the mobo, mod the heatsink and you can put the 1070 in.

    Share this comment


    Link to comment
    Share on other sites

    You need a full UEFI installation , make the hardware-mod to the bottom base (see the pictures here) and maybe a hardware-mod to the heatsink to make the card suitable.

    Then you just need a driver mod and thats it.

    Share this comment


    Link to comment
    Share on other sites

    Here are my laptop specs :

     

    Alienware M17xr4 - I7 3740 - GTX 680m - 16 Go RAM - 256 SSD Samsung 840 Pro - 750 HDD - Full HD 3D 120 hz

     

    is that ok ?

    Share this comment


    Link to comment
    Share on other sites

    Yes this is OK, you can upgrade your GPU whatever CPU, RAM, SSD or HDD you're using. I explained all requirements on the thread.

    Share this comment


    Link to comment
    Share on other sites

    @decool if I were you, I'd go with a gtx1060, performance-wise it's still going to run all games perfectly fine at 1080P and it'll work great with the 120hz screen. The gtx1070 requires a bit more modding as explained in this thread, since you're probably not very experienced, I'd say the gtx1060 would be perfect for you.

    Share this comment


    Link to comment
    Share on other sites

    I'll wait for the stress test on the 1070, i hope it runs fine

     

    The 1060 is less powerful the the 980 :(

    Share this comment


    Link to comment
    Share on other sites

    @decool The 1060 beats the 980 while the power consumption is lower, also finding a desktop grade 980 for a laptop is really hard, and it probably might not even work, overheating, not enough power. And the gtx1060 beats the 980m hands down.

    Share this comment


    Link to comment
    Share on other sites

    You're correct, in benchmarks the 980 outperforms the 1060. But in games the difference is minimum, if that's what you're going to use it for. But looking at it rationally the 1060 would outperform the 980 if you compare other factors like, almost the same performance but vastly lower power consumption, thinner card, longer battery life, lower temps and it's a newer generation card so it has more features, though I cannot support that last argument since I'm not too experienced with the features. :P

    Share this comment


    Link to comment
    Share on other sites

    Hello,

     

    I don't know where they get those values, if you take one benchmark alone you can find all kinds of results, but most benchmarks are getting best results with GTX 1060 than with 980m. On Firestrike, graphics score is around 12k with a 1060: http://www.3dmark.com/fs/11110201 (AW 15 R3) or http://www.3dmark.com/fs/11542451 (AW 13 R3). Score is around 9k to 10k for a 980m: http://www.3dmark.com/fs/6964861 (AW 15 R2) or http://www.3dmark.com/fs/7358145 (AW 17 R3). You can find better scores for the 980m since this card is more common, it has been widely overclocked and there is modified vbios available.

     

    Best deal between those 2 cards is if you can find the 1060 for 500$ or cheaper. If not, you can try finding a 980m around 450$, it's still a good deal, altough it's an old generation GPU now.

    Share this comment


    Link to comment
    Share on other sites
    On 4/17/2017 at 1:13 PM, decool said:

    Here are my laptop specs :

     

    Alienware M17xr4 - I7 3740 - GTX 680m - 16 Go RAM - 256 SSD Samsung 840 Pro - 750 HDD - Full HD 3D 120 hz

     

    is that ok ?

    I call dibs on the 680m lol! well if you do upgrade that is, im stuck between keeping the just about usless 3d function or update for better gfx, its more the wifes machine while the evga rig i built her gathers dust >_< but alas, was looking into an upgrade and while this is a wild bump in performance she only plays one game, FF XiV so no real need to have something so strong, maybe a 980m or an 880m bah so much to do so little time ^_^

    Share this comment


    Link to comment
    Share on other sites

    Have you noticed that you're talking about the GTX 980 (Laptop) and not about the GTX 980M?

    The GTX 980 (Laptop) has an extra power connector and needs some work to the bottom base like the GTX 1070.

     

    The GTX 980M has no extra power connector and fits without any work to the bottom base like the GTX 1060. They are both nearly plug and play and the GTX 980M is on place 39 on notebookcheck.

    Share this comment


    Link to comment
    Share on other sites

    Good to see successful upgrades to 1070.

    I want to get one, but they are so expensive, and then I dont know where I could sell my current 980m, I dont think that 500$ to go from 980m to 1060 is worth it, its a bit faster yes, but not 500$ faster..

    Share this comment


    Link to comment
    Share on other sites

    Hello,

     

    980m i still selling at high price and there are buyers for it so you can easily sell it on marketplace such as Ebay. Then, if you want I can give you email of my russian contact who can get you a 1060 for interesting price, so upgrade won't cost you 500$ in the end but maybe around 200 to 300 only. If you can sell your 980m for a good price (I see it can be sold between 450$ to 550$), you can even upgrade to a 1070 for 300 to 400$ in the end, which seems interesting.

    Share this comment


    Link to comment
    Share on other sites



    Create an account or sign in to comment

    You need to be a member in order to leave a comment

    Create an account

    Sign up for a new account in our community. It's easy!

    Register a new account

    Sign in

    Already have an account? Sign in here.

    Sign In Now

  • Similar Content

    • By learnfromit
      alienware 15 r2 970m with i7-6700hq vbios request so i can overclock and mess with voltage.

      BIOS version backup made with techpowerup GPU-z.

      GM204.rom
       
      or can someone re direct me to one already made that will work? all links i find are dead, thanks.

    • By duffman_777
      Managed to find a relatively cheap MSI 1070 on ebay, and after reading a few success stories that 1070's are compatible I decided to pull the trigger. 
       
      Modified the bottom case as per the photo on this FAQ page http://www.eurocom.com/ec/faqs(272)ClevoP150EM_SagerNP9150_XMG_P502_PRO. Things were going well until I went to screw the card down and felt some resistance.
       
      Oops. Looks like that capacitor(?) with the blue on it *just* clashes with the card. Now what's weird is not all P150em motherboards seem to have this component on it - looking at replacements this component is not there. Also looking at the photos from this 1080m P150em mod (https://premamod.wordpress.com/2017/10/10/clevo-pascal-mxm-standard/), this component isn't there either. Does anyone know what this is, and if it can be removed? Or, if this could be taken off and shifted out of the way somehow, or replaced with a smaller equivalent...?
       
      In my disbelief/annoyance/problem solving when trying to push it down, I did notice that the card has a surprising amount of flex in it and it *can* be screwed down almost completely to a level where I feel somewhat comfortable in doing... Though I'd rather not put this strain on the card if there is a way to avoid it.
       
       
       
       
       



    • By Terriikk
      Hey guys, I have an Alienware m14x R2, and I have been trying to get access to the BIOS so that I can change the boot options (Everything is locked, I am unsure if someone set a password of if these are locked by default).I've tried updating the BIOS, and resetting the CMOS and nothing has changed this. Would anyone know if there are other options I can explore? Thank you. 
    • By danger007
      Well I am back, sort of.
       
      Reminder of Stats
      *Alienware M17x R4 (bought June 2012) w/ Intel i7 3720QM@2.6ghz (Ivy Bridge) including the igpu Intel 4000 HD series
      8GB Ram, 17 Inch, SoundBlaster software only Recon 3DI, and the normal stuff that comes with it
      *Graphics Card:  Originally shipped 660m, upgraded to 7970m, 7970m died early, with community help moved to MSI 4GB 680M (flashed to Dell thanks to @svl7) and installed I think 314.xx drivers with help from many (sorry can't remember everyone but notable was @J95), was running 7970m in whatever they called their hybrid drivers, the 680m is run in Optimus)
      *OS:  Windows 7 64bit Service Pack 1
      *Storage:  Msata 1tb Samsung 850 Evo, 2 Hitachi 1TB 7200 rpm 2.5" drives (yes I used all 3 GB or will)
       
      So what will you read.  What got me started on this project and then using all the resources on the net, from @J95 and legions of others I owe all credit for the project too.  Please note I take no credit, take no rights, this is simply something to help others out based on working with what has already been laid down for us.   Installing the latest Nvidia 417.67 mobile/notebook drivers for a 680m for Windows 7 Service Pack 1 on Alienware M17x R4
       
      When I got things up and running back in 2016/2017 with the noted people above I saw a new driver and with the STO game having a driver issue I upgraded to it.  Now I didn't notice anything wrong, the game worked and so paid no attention.  When I started to get unable to eject 680m error messages I thought great who got this, ejecting a gpu, wrong.  I then tried the uninstall Intel, Nvidia, use DDU in Safe Mode, disable AV/Firewall, disable driver enforcement, etc then reinstall intel, nvidia (removing certain folders) with the modified inf but now the game said it couldn't find any feature set and wouldn't let me play.  Finally removing the Nvidia drivers allowed at least the iGPU to run the game.  Used Unigine Heaven 4.0 to encounter more errors with Nvidia.
       
      I moved back to my msata install of windows 7 that I haven't had a chance to work on since 2017 (i know pathetic) that only had system drivers, expired Norton, and not yet registered/activation.  Seems fine.  Tried to run Heaven, same error.  Well after 3 days of trying to duplicate what I had been instructed to do, I finally sat down with a nice big bottle of Fiji Water (courtesy of lovely lady at the Oscars in almost every background pic) and decided I was determined to fix things.   I downloaded the 419.67, copied the nv_dispi.inf & nvdmi.inf to get to work.  After reading the content and using comparisons once again from the noted individuals and the legions of other, I had them modified and decided to give it a try on the clean win 7 install from 2 years ago.  After the uninstall, ddu, deleting folders, copying mod. inf to their directory (also included the change to setup.cfg - credit once again goes to individuals like @J95), gyrxiur, DeathAngel , creator of Notepad++, sora and many others) I was able to launch the Heaven 4.0 Benchmark.  So I am assuming that I have the new 419.67 working on my system.  I did a benchmark of the 680m in 419.67 with unigine Heaven 4 to go with the files I am posting.  Please note the bios was provided by I believe @svl7 (sorry if I got wrong person) and no overclocking of it other than what the changed vbios did.
       
      I am attaching below the following:
      Nvidia 419.67 modified inf and config - nvdmi.inf, nv_dispi.inf, setup.cfg (no credit to me all credit belongs to others)
      The Unigine benchmark results (txt file).
       
      Now the shortened legalize warning
      Please remember you are to take all risk when using modified inf files, I take no responsibility (no virus or other dildrus included) if they don't work with your GPU.  The usual.
       
      This was tested and used on Alienware M17x R4 running the last bios they released A12 or A13 and so it the system bios is not modified at all, the card is a MSI 680m 4Gb flashed vbios to Dell 680m 4GB, and installed in Windows 7 64bit Service Pack 1.  Hopefully if you have only a different card you can make any minor adjustments you need to.  
       
      Please let me know how they work.  I will also be reporting back on the reinstall on my other laptop install I use to play Neverwinter/ Star Trek Online - was suppose to be a temp solution till new install was finished, and if they worked on it as well.
      Alienware M17x R4 680m 419.67 Mod Inf and Setup and Heaven 4 Benchmark.zip
    • By Edrc
      Hello,
       
      I am new on this forum, so I am sorry if posting at the wrong place. It's been 2 weeks that I am searching how to make my GTX 980M 8GB working Inside my Alienware 17 R1 (June 2014, i7 4710MQ, 60 Herts Display, OPTIMUS and the GTX 880M Inside died.)
      After "quickly" looking some forums, I saw that a 980M would easily fit Inside … but maybe I was wrong.
       
      Hardware wasn't a problem. I've also could install drivers by modding the nvdmi or nvcvi. inf files. The card was recognied BUT :
      the clock speed is locked a 135 or 405 Mherts and fan is not runing when booted up.
      I tried to flash vBios with nvflash and some ROM I found on vBios collection … but no way to get this working properly.
       
      So, i'm coming here. I've seen many people talking about Prema or svl7 or other big boss in the place … but ? how ? where ? when ?
       
      Inside the peripherial manager I have this in remote acces path : PCI\VEN_10DE&DEV_1617&SUBSYS_05AA1028&REV_A1\4&D590A51&0&0008
      So I assume my GTX 980M card ID is 1617 and vendor and PC Model are 05AA 1028.
      But near the "Standard Microsoft Video Card" there is a yellow exclamation point and Inside details it says "this peripherial doesn't work properly" when no Nvidia drivers installed.
      I could find some vBios with 1617 (Asus) but black screen at boot up. Since laptop model where not the same .. probably.
      And I wasn't able to find 1617 with the existing 05AA 1028 … as the GTX 980M was not an option for my model. (AW 17 R1 2014 ,60Herts)
      I tried 353.60, 382.33 and 419.35 drivers. The latest one seems easier to install but longer.
       
      BIOS is A16 from Dell. And I am using Windows 10. Got a Dell 330W brick. 
       
      I saw a guy with the exact model as me, he gets a modded vBios especially for his configuration, then everything worked easily … but can't find the topic again
       
      I guess depending on the card info and the laptop model … a dedicated vBios is required … 
       
      So, If anyone here got some informations or any kind of help for me, it would be very nice.
       
      Thanks for reading and help.  
       
      PS: there are a lot of files, pictures and links that I can't see on this forum .. even after registration …. 
       
×

Important Information

By using this site, you agree to our Terms of Use. We have placed cookies on your device to help make this website better. You can adjust your cookie settings, otherwise we'll assume you're okay to continue.