Jump to content
  • Sign in to follow this  

    MSI GT60-0NC Notebook Watercooled


    Brian

    Posts like the one highlighted below are what make up the heart and soul of Tech|Inferno. We've got enthusiasts  like HotPantsHenry that take a perfectly good MSI GT60-0NC notebook with an 880m GPU and decide to take it to the next level by strapping on a waterblock to it using electrical tape..that's right electrical tape!

     

    Check out the rest of his thread here: https://forum.techinferno.com/index.php?/forums/topic/8923-msi-880m-overclock-help/

     

    Original Post Content:

     

    Here is an awful picture, but will give you an idea of what is going on. 

    Cpu cooling is stock. Even with minor OC to the cpu, the temps stay pretty cool. 

     

    1210151924.jpg

    Edited by Brian

      Report Article
    Sign in to follow this  


    User Feedback


    There are no comments to display.



    Create an account or sign in to comment

    You need to be a member in order to leave a comment

    Create an account

    Sign up for a new account in our community. It's easy!

    Register a new account

    Sign in

    Already have an account? Sign in here.

    Sign In Now

  • Similar Content

    • By Psycha
      Hello, I'm on an alienware m17 r4 and am trying mod my vbios for a 970m 3GB msi. I've managed to get the max boost with an increase in voltage, however I believe my voltage settings maybe unstable. When attempting to load programs capable of high gpu usage capabilities, the gpu begins to become pretty unstable. would anyone be able to provide assistance? I have both my edited and original roms as well.
       
      *update
       
      I'm not sure how to delete this thread but disregard this please. I've figured out the issue.
    • By Say
      Wlc,
      I want to create an afermarket diy cooling solution for my laptop.
    • By moaker
      I dont know if this is the right forum to post this,  (but i need 5 posts for downloading a  vbios)
       
      so my questions are these, thank you in advance for reading
       
      I have bought a laptop with a half melted 880M GPU Im assuming the person did not keep an eye on temps,
      so i went and replaced the card, it runs fine, (alright) but still, I remember modding my VBIOS for my 680 GTX back in the day, and it was fine, exceptionally faster, 
      and im looking for that 60 fps LOCK, like i got on my 680 after modding the vbios, 
       
      I did increase the voltage on the card to 1.212 I believe, from 1.114 ,
       
      anyway I considering modding the cooling system as well for this laptop, because it definitely lacks cooling 
      My plan is to put another laptop fan (where the HDD1 bay is in the Alienware 17) bcause I removed that hdd it was constantly at 57c which is bad
      even think it suffered some damage as speeds on it for specific games and tasks are pretty long, and it stays at 100% some times, which is weird, but it still works, so im using it.lol
       
      , but in the meantime, I turned the laptop upside down, plugged in the HDMI cable, and now im blasting a ROOM fan at it, which is definitely helping with temps
      before I would try to throttle the gpu speed at 77C, or 73C depending on the game or even saying screw it, I dont want throttling, and putting the throttle point to 83C,
      I use SPEEDFAN , and it helps keep the laptop relativly cool, except when the gpu is under full load,  putting my hand on it is ridiculously hot, so, with the fan on it, its not going above 70,
      and taking a LONG time to get up there, 
      i am playing metro last light at around 60C at 60+ fps, where as before my temps were shooting upto 80 and it would hit the throttle point, so  seeing as how this is a 120 HZ laptop, I rather not push it, since the card is not capable (and if it is, the cooling sure isnt)
       
      the plan is to put the fan inside the HDD1 bay, and POSSIBLY  daisey chain it to either A) the cpu fan header, or  B ) the gpu fan hjeader, 
       
      QUESTION:
      not sure which "rails" the power for these comes from, would it be able to handle another fan???
      it seems like a legit idea, seeing as how the rear of the heatsink has NO heat dissipation at all. which is the part that melted offcausing the old  card to die in the first place.
      basically the thermal pads look like they gunked the card and it was unfixable, I have a post to it on the Alienware Forum, which i could link later,
       
      is it a good idea, and will the VBIOS WORK with my 880M (DELL) from a clevo, (now in an alienware) im assuming they are compatible, as long as they are dell.
      also would I be able to get a Y adapter for the inside of a laptop fan, that would be AMAZING, i know they sell them for Desktops.
      Thanks
       
       
    • By Sarafan
      Does anyone have experience with this?

      Some threads I've seen have done it on a 17 inch laptop, I was wondering if it was possible on the 15 inch version as well.

      What issues will I face? I read about having to have a custom BIOS and vBIOS..but also HDMI/audio issues.

      I guess I should also upgrade my CPU, which runs really hot (i7 4800MQ), but not sure another Haswell chip will run any cooler.

      I've used liquid metal and even that hasn't changed temperatures much, it still reaches 93C pretty easily.
    • By fs7halkx2
      Hi,
       
      I own gx740 with i5-430m, 4GB RAM, and I planned to do some upgrades.
       
      Currently I did:
      - upgrade SSD, move HDD to dvd drive space
      - have some unlocked bios (but didn't found usage for it currently)
      - have modified vbios but not sure if the values I've used are good
       
      I was thinking about:
      - upgrading CPU to i7-640M
      - upgrading RAM (not sure which will fit)
       
       
      I would like to also:
      - fix broken/cracked frame around screen, but it wont be easy and cheap I guess?
      - replace screen to something brighter (?) but this will probably not be worth the cost
       
      1) What do you guys think about it? Is it even worth?
      2) I've also see something like 'grain effect' moving grey stripes on same page elements (long time I remember it could be related to faulty bios/vbios)?
×

Important Information

By using this site, you agree to our Terms of Use. We have placed cookies on your device to help make this website better. You can adjust your cookie settings, otherwise we'll assume you're okay to continue.