Jump to content
  • Similar Content

    • By smithwiliam
      The error code mainly appears with an error message IOT Motor as when IOT Motor has failed, but the other causes may be include as Print Head Device (PHD), like PHD Unit incorrect seated, optional components, etc The prime way to fix the problem is to understand the reason first. To help you out in best possible way,you can also ask for approachable help from Dell Customer Support Services.
      How We Support:
      100% Fully Assistance
      We Are Available 24*7
      We Work Fast as per Customer demand
      Toll-Free No: +1-888-633-7151
      For more info do visit us: Fix Dell Printer Error 007-341
       
    • By Sparkhunter
      Hi there guys,
       
      I've been looking into getting a new GPU for my laptop (4-lane PCI-e) and enclosure (HP Omen Enclosure) but I cannot decided between the RX 5700 XT and the RTX 2070 (non SUPER).
       
      I did some price to performance calculations (higher is better) with some of the best prices I can currently get in the UK.
       

       
      The RX 5700 XT does perform better and is cheaper than the RTX 2070 (Although the 2070 does come with 2 games) but my main concern is drivers and from what I've heard NVIDIA cards work a lot better with eGPUs than AMD.
       
      If anyone has experience using both red & green or if anyone else has any other input i'd love to hear your experiences and input.
       
      Thanks.
       
    • By Solaire
      Hello everyone,
      some time by now I flashed a custom Vbios (thank you Klem) on an Acer Predator 15 G9-591 and I started doing some tests about how far I could go overclocking the gtx 970m without running too hot. With the voltage up to 1150mV and something like 300 additional MHz for the core clock, in the strongest stress condition for both Gpu and Cpu ( i7-6700hq undervolted), the Gpu reaches a max temp of 85C (with some 86 spikes but never more than that).
      Considering that soon I'm going to relid both Cpu and Gpu and clean everything in the internals (laptop is 4 years old) I think I'm going to have some additional heatroom.
      I've already tested some further overclocking and I noticed that even if the temperatures remains under 93C (which is just for testing purposes, but after relidding temps could be nicer) graphical glitches occur and after some time most games crash. But my question is, could it be because of lack of power supply? The laptop charger provides 180W 
      Could there be an increase in overclock margins with a 230W psu or something like that? (Obviously with the same 19.5V output)
      If anybody tried something like that on any laptop model, or knows the matter, I'd like to know
    • By jasonmerc
      Hey everyone!  After lots of searching it looks like this is the go-to place for laptop mods online, so I figured this would be the best place to ask something like this.
       
      I picked up a Dell E6530 for basically scrap value, and I love the thing.  Runs Xubuntu great, battery is halfway decent, and I can play 99% of the games I own on it.  My friend on the other hand picked up an E6440 with its silver-ish finish along the back.  As much as I love my 6530 I've gotta say, that thing looks great.
       
      To get to the point now, I was wondering if it's possible for me to polish the top of the lid on my 6530 to have a more silver finish like that (or maybe even a mirror finish if I sand it down with a fine enough grit).  Really what I want to know is if the dark grey part of the lid is actually metal.  I can't seem to get a definitive answer online, and I tried the magnet test on it and it wasn't magnetic at all.  This doesn't necessarily mean it's not metal though, as aluminum isn't magnetic but is obviously a sandable/polishable metal.  One source said the laptop has anodized aluminum parts on it, but they didn't specify whether it was something internal or external.
       
      Can anyone here provide me some insight?  If the grey part is definitely a metal and not a plastic, I think I'm gonna give it a try.  As stated before I got this thing for scrap value, so if in the end it doesn't work out I'm not gonna cry over it or anything.  Still though, I'd rather not run into this blind.  If this is indeed possible though and I can accomplish what I want with a decent looking result, I'll post up some pictures with the method I used for others to do as well.
       
      Thanks in advance!
×

Important Information

By using this site, you agree to our Terms of Use. We have placed cookies on your device to help make this website better. You can adjust your cookie settings, otherwise we'll assume you're okay to continue.