• Sign in to follow this  
    Followers 0

    NVIDIA Releases 361.43 WHQL Driver


    Brian

    NVIDIA earlier today released the 361.43 WHQL driver which comes with some long awaited fixes that cover power usage when idle at 144 Hz as well as SLI issues with Star Wars Battlefront. In addition, the driver adds support for GameWorks VR 1.1 as well as support for Oculus VR's latest SDK.

     

    Some highlights from the 361.43 release notes:

     

    Gaming Technology

    • Support added for GameWorks VR 1.1 including VR SLI support for OpenGL applications and support for the latest Oculus SDK.

     

    Application SLI Profiles Added or updated the following SLI profiles:

    • Bless - DirectX 9 SLI profile added
    • DayZ - SLI AA and NVIDIA Control Panel AA enhance disabled
    • Dungeon Defenders 2 - DirectX 9 SLI profile added
    • Elite Dangerous - 64-bit EXE added • Hard West - DirectX 11 SLI profile added

     

    Windows 10 Fixed Issues 

    • Cleaned up flip timing and event notification bugs. [200151547] 
    • Fixed a driver bug where if the output is active, hot unplugging a device will cause any following hot plug device to be ignored. [1707505] 
    • Cleaned up unexpected behavior related to the multi-HMD (helmet-mounted device) use case. [200152110] 
    • Return NVAPI_NO_CONNECTOR_FOUND from the NVAPI_GPU_GetAllDisplayIds() when headless GPUs are detected to allow for identification of the unsupported use case. [200155835] 
    • [GM20x] Clock speeds remain above idle at 144 Hz on desktop. [1631144] 
    • Lag in Star Wars Battlefront with SLI enabled after updating to driver 359.06. [1709067]

     

    Windows 8.1/Windows 8/Windows 7/Windows Vista Fixed Issues

    • Prevented an extra hotplug/unplug for unconnected devices in escapeDirectModeEnable\DisableVRDirectMode(). [1707485] 
    • Fixed windowed G-SYNC not being totally disabled at the UMD (user-mode display) when the VR display is active. [200146036] 
    • Updated the whitelist entry regkey to allow multiple entries at once. [200155690] 
    • [GM20x] Clock speeds remain above idle at 144 Hz on desktop. [1631144] Other Fixed Issues 
    • Increased robustness of the VR SLI queued present implementation to mitigate flickering and tearing related to rendering to the scanout surface. This is not operating system specific. [200151843]
    Edited by Brian

    Sign in to follow this  
    Followers 0


    User Feedback


    i see that 361.42 is the available version for download for linux 64. When i try to install nvidia drivers downloaded from nvidia's site in my Lenovo Y500 650m SLI, my ubuntu stops working. Then i have to remove/purge everything from nvidia and install them through apt-get. Of course not this version.

    Does anybody follow the linux driver versions? I mean does anybody use the official site to download the latest drivers in linux?

    Share this comment


    Link to comment
    Share on other sites


    Create an account or sign in to comment

    You need to be a member in order to leave a comment

    Create an account

    Sign up for a new account in our community. It's easy!


    Register a new account

    Sign in

    Already have an account? Sign in here.


    Sign In Now

  • Similar Content

    • By J95
      Game Ready
        •Provides the optimal gaming experience for Sniper Elite 4, For Honor, and Halo Wars 2.

      New Features:
        Video SDK 8.0
        •High-bit-depth (10/12-bit) decoding (VP9/HEVC)
        •OpenGL input surface support for encoder
        •Weighted Prediction
        •H.264 ME-only mode enhancements

      Application SLI Profiles:
        •No SLI profiles were added with this version.
       
      Added or updated the following 3DV profiles:
        •Sniper elite 4 - Not recommended

      3D Compatibility Mode Profiles:
        •Sniper Elite 4 - Excellent
        •For Honor - Excellent

      Changes and Fixed Issues in Version 378.66:
        •[Surround]: Surround cannot be enabled on the XGPU. [200236703]
        •[G-Sync]: With G-Sync and V-Sync both enabled, there is a long delay when switching a game from full-screen mode to windowed mode.[1867557]
        •[Second Life 64-bit]: World view is tinted blue after disabling Advanced Lighting Model. [200274562]
        •[The Division]: Shadows flicker after enabling PCSS. [1867573]
        •[Kepler GPUs][Battlefield 1]: There is flickering in the game when using TAA. [1865681]
        •[SLI][Battlefield Day28 Patch]: The menu text becomes jittery with SLI is enabled. [1837721]
        •[SLI][Surround][GeForce GTX 1080]: The system crashes when launching games in SLI Surround using HDMI 2.0 connections. [1834142]
        •[GeForce GTX 1080][Heroes of Storm]: The game crashes when launched. [200274793]
        •[GeForce 860M][Notebook]: Direct X games crash. [1868454]
        •[Minecraft]: Java SE Binary crashes pointing to nvinitx.dll. [200274582]
        •[GeForce GTX 980 Ti]: The driver is unable to detect multiple TV models. [1788948]

      Software Module Versions
        •NView - 148.47
        •HD Audio Driver - 1.3.34.21
        •PhysX System Software - 9.16.0318
        •GeForce Experience - 3.1.2.31
        •CUDA - 8.0
       
       
       
      Windows 10
       64-bit
        32-bit 
             Windows 7 & 8.1
       64-bit
       32-bit
       
    • By J95
      Please follow the instructions below.
      • Specs.
      • Device manager ->Display Adapters ->Details ->Device Description ->Hardware Ids, post results (request).
      - Extract downloaded driver using 7-Zip/winrar.
      - Extracted Nvidia...International\Display.Driver folder\ -> copy/overwrite nvdmi.inf
      - Nvidia...International folder\ -> run setup.exe
      - Windows 8 - disable driver signing
      Command Prompt (Admin) Win key + X Type:
        bcdedit /set {current} testsigning yes -> "The operation completed successfully" ->reboot ->Install drivers.
      Exit test mode, cmd (admin).
        bcdedit /set {current} testsigning no ->reboot.
      - Use DDU to remove previous drivers/GPU installations (Nvidia & AMD), create restore point then select first uninstall option (safe mode).
      GeForce 334.89 WHQL
      Modded nvdmi.inf v334.89 AW M17XR2/R3/R4 3D + M18XR1/R2 GTX 680M / 780M
      Modded nvdmi.inf v334.89 AW M18XR1/R2 GTX 680M / 780M SLI Enabled
      - - - Updated - - -
      Quadro Notebook Driver 334.95
      PhysX 9.13.1220
      - Extract
      - Nvidia...International folder\ -> delete the following folders:
      Display.NView
      Display.Update
      Display.Optimus
      NVWMI
      - Display.Driver copy/overwrite nvdmwi.inf
      - Nvidia...International\ -> run setup exe
      - Install Physx -> reboot
      Fire Strike NVIDIA GeForce GTX 780M video card benchmark result - Intel Core i7-3940XM,Alienware M17xR4
      [
      nvdmwi.inf_v334.95_AW_M17XR2_R3_R4_3D_M18XR1_R2_GTX_680M_780M.zip
      nvdmwi.inf_v334.95_AW_M18XR1_R2_GTX_680M_780M_SLI_Enabled.zip
    • By 750dmg
      Hi guys,
      I succesfully flashed v2 vbios from prema and I tried 1v and and oc but I couldnt. I think it was power suply. Mine is 230w. And I tried 0.75 0.50 0.25 and 0 volt. But now I m trying game, benchmark screen goes dark and after beeping at 0 volt. Is this a hardware damage? I used just 1v max.(temperature max 70c)
      I tried
      cmos reset
      DDU
      Xtu uninstall
      And come back to stock vbios
      I think my card is dying
      Please help me!
       
    • By Izzard
      Listed on eBay here:  http://www.ebay.co.uk/itm/AKiTiO-Thunder2-PCIe-Box-Thunderbolt-to-PCIe-e-g-Mac-eGPU-/201808361125
       
      For sale is one boxed AKiTiO Thunder2 PCIe Box. This has been modified - as per various tutorials available online - to open up the back panel which otherwise restricts the length of PCIe card it can hold.  This - plus a suitable power supply - enables this device to support full size/length GPUs.  (The supplied power unit is sufficient to power the Thunder2 box itself plus any PCIe card with standard power draw, such as Ethernet Adaptors, Fire Channel cards, SAS/SAT, Firewire/USB, Storage, etc.  Some lower-power GPUs do not require any additional power but most do, which is why the suggested solution for an external GPU is to use a PC PSU.  For that reason, this auction includes the molex-to-barrel connector that I used to power my eGPU, though lots of other solutions are available. Enjoy experimenting!)   If you're reading this listing then you probably already know what you're doing but if not - or if you get stuck - the Tech|Inferno Forums (among others) are a fantastic source of information and that's where I learnt how to set mine up: https://www.techinferno.com/index.php?/forums/forum/83-diy-e-gpu-projects/   I had great success with this, using it to add an NVIDIA GTX 970 GPU to my 2011 Mac mini which made it a gaming powerhouse.  I'm selling this now because I've finally sold my beloved Mac mini for something newer.  An eGPU can be used in macOS and Windows.   If you have any questions about this particular unit please get in touch before buying or making an offer. I will be very happy to respond!   Please note: No GPU is included in this auction. You can use any PCIe card. The photos here including a GPU are for illustrative purposes only.  The external case, fan and power supply are all included. The case and power supply have never been used, since my large graphics card would not fit inside the closed case as it arrived and I used an external power supply. But if you want to use this with a smaller card, you can certainly fold the side back in and use the outer case, fan and power supply as designed if you wish - it's all included. NB: I didn't keep the little power LED at the back of the case but be assured it's not needed and there is an LED on the board anyway that shows when it's powered. The box says the product is not compatible with Apple's Boot Camp and does not support graphics cards.  There is nothing technically stopping it (and it works great) but due to a clause in the licensing of Thunderbolt technology they are not officially allowed to market it as such. This sale is aimed at gamers/enthusiasts. It definitely works brilliantly but is neither supported by me nor by the manufacturers so I can't accept a return on the basis you couldn't get your eGPU to work right. There is a lot of information online and some fantastically helpful people in various forums. Also, it's not at all difficult and extremely satisfying - so have a go!  If you want to use this device as per its original intention, the official product page is here: https://www.akitio.com/expansion/thunder2-pcie-box